ElemRV - End-to-end Open-Source RISC-V Microcontroller
-
Updated
Aug 28, 2026 - Scala
ElemRV - End-to-end Open-Source RISC-V Microcontroller
Tiny tapeout gf180 ocd sram test for the gf0p3 shuttle
NumPy → streaming ISP hardware (Verilog) compiler
Clean-room container for building RTL → GDSII: a slim, pinned open-source EDA toolchain (Yosys · Verilator · OpenROAD · Magic · KLayout · Netgen · ngspice + sky130/gf180 PDKs), built from scratch on GitHub Actions and published to GHCR.
This project implements a tetrahedral oscillator inspired by the paper “Analysis and Design of a Tetrahedral Oscillator” by Richelle L. Smith and Thomas H. Lee. The oscillator is built from coupled inverter pairs, and its operating frequency is tuned by adding capacitive loads to the internal nodes.
VyBox Lite: One-click Codespaces environment for trying Vyges chip/IP development in your browser.
Open-source waveguide mode analysis software
Capless digitally-trimmable LDO for IHP SG13CMOS5L — Chipalooza Challenge #2 IP.
A 12-track height standard cell library built in SKY130 PDK. It is made up of 12 combinational cells, which were designed using Magic VLSI Layout Tool and characterized using
Reproducible Yosys synthesis distro — from-source, multi-arch (amd64+arm64).
Closed measurement kernels: coherent single-tone spectral (SNR/SINAD/THD/SFDR) and AC transfer (gain, bandwidth, unity frequency, phase margin).
Canonical structured events (vyges-events/1.0) + tracing bridge for Vyges loom engines and tools. Schema co-located & self-published. Apache-2.0.
World's first open-source Vedic math (Urdhva Tiryagbhyam) hardware multiplier. 8×8 RTL, synthesized with Yosys on ARM64 Termux.
A standard-cell library I designed from scratch for sky130: transistor sizing from device physics, my own gdstk layouts signed off with the official KLayout DRC/LVS decks, and my own ngspice-to-Liberty characterizer (multi-PVT, with measured setup, hold and minimum pulse width). Zero foundry cells in the chip hardened with it.
Beginner-friendly, Docker-based starter kit for designing a GF180MCU chip from RTL to a manufacturable GDSII — simulate, verify, and harden a working example, then make it yours and submit it to a wafer.space shuttle.
Add a description, image, and links to the open-source-silicon topic page so that developers can more easily learn about it.
To associate your repository with the open-source-silicon topic, visit your repo's landing page and select "manage topics."