Logic Pro for Mac 12.3
Logic Pro for Mac 12.2
Logic Pro for Mac 12.0
Logic Pro for Mac 11.2
Logic Pro for Mac 11.1
Logic Pro for Mac 11.0
Logic Pro for Mac 10.8
Logic Pro for Mac 10.7.8
Logic Pro 10.7.5
Logic Pro 10.7.3
Logic Pro 10.7
Logic Pro 10.6.2
Logic Pro 10.6
Logic Pro X 10.5
Mainot šo vadīklu, tiks atkārtoti ielādēta lapa

Remix FX in Logic Pro for Mac

Remix FX includes a set of buttons, sliders, and XY pads you can use to control several real-time effects common to electronic and dance music. It makes it easy to scratch mix your project, much like a DJ using a turntable, to play short pieces of audio in reverse, to stop or downsample the song, and to apply a variety of other effects. It is intended mainly for use on the stereo output bus, but you can insert the plug-in on any type of signal in your project.

You can view and control Remix FX in the plug-in window or in the Smart Controls area. When you insert Remix FX on a channel strip, a Remix FX button is added to the Smart Controls menu bar for that channel. For more information, see the section Show Smart Controls for master effects.

To add Remix FX to your project, choose Multi Effects > Remix FX in a channel strip Audio Effect plug-in menu. See Add, remove, move, and copy plug-ins.

Remix FX can be fully automated so you can record, edit, and play back any movement of the Remix FX parameters as automation.

You can also control the XY pads and other parameters with MIDI controllers, assigned with Smart Controls. See Smart Controls overview.

Figure. Remix FX window.

Use the XY pads on the left and right to control various time-based and modulation effects. Drag the pointer horizontally (X axis) or vertically (Y axis) to set the value of the parameter shown on the bottom or left side of each pad.

XY pad pop-up menus: Clicking the name of the effect at the top of the XY pad opens a pop-up menu. Choose an effect type for either the left or right XY Pad.

  • Filter: Removes frequencies above a cutoff frequency and accentuates frequencies around the resonance value. X sets the cutoff frequency and Y sets the resonance value. Click the Settings button  to access the following additional parameter:

    Mode: Choose between Phat, a warm-sounding filter with a 24 dB lowpass and 24 dB highpass filter, and Classic, a clean, state-variable filter with a slope of 12 dB/octave.

  • Wobble: Modulates the audio signal through a vintage-style filter effect. X sets the modulation rate and Y sets the modulation depth. Click the Settings button  to access the following additional parameter:

    Time: Select from options for note division, note division with an added triplet, or a triplet of the note division.

  • Orbit: Modulates the audio signal through a flanger effect, phaser effect, or a mix of both. X sets the modulation rate and Y sets the modulation depth. Click the Settings button  to access the following additional parameter:

    Mode: Choose between a phaser effect, a modulation effect that is a mix of both a phaser and flanger, or a flanger effect.

  • Repeater: Creates a stuttering effect. X sets the repeat rate and Y sets the mix amount. Click the Settings button  to access the following additional parameter:

    Time: Select from options for note division, note division with an added triplet, or a triplet of the note division.

  • Reverb: Adds ambience to your audio signal. X sets the reverb time and Y sets the mix amount. Click the Settings button  to access the following additional parameter:

    Color: Choose the character for the reverb. Dark rolls off the higher frequencies. Medium offers a relatively neutral ambience. Bright rolls off the lower frequencies.

  • Delay: Adds echoes to your audio signal. X sets the modulation rate and Y sets the feedback depth. Click the Settings button  to access the following additional parameter:

    Time: Select from options for note division, note division with an added triplet, or a triplet of the note division.

Remix FX parameters

  • FX Lock button:  Freezes the current X and Y values when the pointer is removed from the pad.

  • Reset button: Immediately halts all XY pad effects. Any active XY pad locks remain active.

  • Gater slider:  Applies a gate-style effect on the incoming signal. Click the Settings button  to access the following additional parameters:

    Gater: Select from options for note division, note division with an added triplet, or a triplet of the note division.

    Noise: Injects a small amount of soft, noninvasive noise into your signal, so that even without any audio signal you can still hear some gating.

  • Downsampler slider:  Changes the resolution of incoming audio, making the sound thinner, gritty, or peaky, similar to Bitcrusher distortion. Click the Settings button  to access the following additional parameter:

    Downsampler: Extreme introduces a sympathetic, ringing frequency to your audio signal. Classic downsamples the audio to “roughen it up.”

  • Reverse button:  Reverses playback of incoming audio. Touch-sensitive effect variations are available on the left and right sides of the button. Click the Settings button to access the following additional parameter:

    Time: Select a note division for the reverse effect.

  • Scratch button:  Simulates a record scratch on the incoming audio. Touch-sensitive effect variations are available on the left and right sides. Click the Settings button  to access the following additional parameter:

    Time: Select a note division for the scratch effect.

  • Tape Stop button:  Simulates the slow down and stop of the incoming audio. Touch-sensitive effect variations are available on the left and right sides of the button. Click the Settings button  to access the following additional parameter:

    Time: Select a note division for the tape stop effect.

  • Settings button:  Shows additional effect parameters for the currently selected effect.

Lock effects on the XY pads

You can lock the XY pads so they retain their current values when you remove the pointer from the pad. Once an XY pad is locked, you can choose a different XY effect for the same pad and use it in combination with the locked effect. When an XY pad is locked, you can click with the pointer at a different spot on the XY Pad and instantly change the parameter values.

  1. Click the FX Lock button  at the top of the XY pad.

  2. Do any of the following:

    • Combine effects on a locked XY pad: Click the name of the effect at the top of the XY pad, then choose a different effect from the pop-up menu.

    • Reset all XY pad effect parameters: Click the Reset button. Any active XY pad locks remain active.

  3. Click the FX Lock button again to unlock the XY pads.

Record Remix FX

You can record Remix FX parameter changes as automation curves.

  1. If Remix FX is inserted on the output channel strip or an aux channel strip, do one of the following to ensure that the track for the channel strip is visible in the Tracks area:

    • Show the output track: Choose Track > Show Output Track (or press Shift-Command-M).

    • Create a track for an aux channel strip: Control-click the channel strip in the Inspector or Mixer, then choose Create Track from the shortcut menu.

  2. Do one of the following to show automation curves:

    • Choose Mix > Show Automation (or press A).

    • Click the Show/Hide Automation button  in the Tracks area menu bar.

  3. On the track where Remix FX is inserted, choose the automation mode. Touch mode is probably best suited because any existing automation curves are overwritten only when you change Remix FX parameters. Otherwise, it follows any existing automation on the track.

  4. Move the Playhead to the point where you want to start recording automation, then start playback.

  5. Change parameters in the Remix FX plug-in.

    Parameter changes are written as automation curves to the track.

  6. Stop playback when you are finished.

When you are finished, you can manually edit the automation curves. In order to avoid unwanted changes to the automation curves during further playback, change the automation mode back to Read.

Download the guides:

Logic Pro User Guide: PDF

Logic Pro Instruments: PDF

Logic Pro Effects: PDF

Control Surfaces Support Guide: PDF

Morty Proxy This is a proxified and sanitized view of the page, visit original site.
Noderīgs?
Rakstzīmju ierobežojums: 250
Maksimālais ierobežojums ir 250 rakstzīmes.
Pateicamies par atsauksmēm!
Morty Proxy This is a proxified and sanitized view of the page, visit original site.