Morph drum beats in Alchemy in Logic Pro for Mac

This tutorial guides you through the process of importing two drum beats and then morphing between them. You will initially morph all elements collectively, then each individually.

Note: Images shown in tutorials aren't specific to presets used in tasks. They're included as a guide to help you find areas and parameters in the Alchemy interface.

Import and morph multiple drum loops in Alchemy

The loops used for this example are from the Electro House and Tech House loop libraries. If you can’t find the loops, you need to download these additional content packages. To do so, choose Logic Pro > Sound Library, then download the missing content in the Sound Library window.

In Alchemy in Logic Pro, click the File button in the Name bar and choose Initialize Preset from the pop-up menu to reset all Alchemy parameters to default settings.
Important: Use of Initialize Preset automatically turns on wide unison mode. See Alchemy wide unison mode.
Click the source select field for source A and choose Import Audio.
The Import window opens.
Open the Apple Loops browser, and type “Lockstep” in the search field. Drag the Lockstep Beat 02 loop to the Dropzone area of the Import window.
Click the Spectral and Formant analysis mode buttons at the lower left, then click the Import button.
This determines the synthesis engine used for resynthesis of the audio sample. Spectral + Formant is a good general purpose option that works well for drum loops. It’s also the default setting in a new instance of Alchemy. When analysis is complete, you can trigger the loop at its native pitch by playing C3 on your keyboard.
Drag the Insider Groove Beat loop to the controls area of source B and choose an import mode from the four options. Drop the loop to perform the import.
Play C3 to trigger both loops at once. The loops are 8 beats long and have a native tempo of 120, so playback is nicely synchronized. Although there are techniques for tempo matching imported loops, it is simpler to use matched samples and improves the potential for getting good results with minimal effort. If the loops have a very different groove, click the Edit button to open the main edit window, where you can do any of the following:
- In the waveform display, create warp markers to divide the loop into equal length segments. The number of markers required depends on the length and complexity of the loop. Aim to have a segment for each significant beat in the loop.
- Slide each warp marker forward or back as necessary to align it with the nearest drum hit transient. Hold a warp marker in the waveform display to zoom horizontally for more accurate adjustments.
- Switch to the other drum loop source with the A, B, C, and D buttons at the top left of the main edit window.
- Slide each warp marker forward or back as before to align each with the nearest drum transient.
Click the A button (under Global), then choose Continuous from the source A Loop Mode pop-up menu. Repeat this step for the source B loop.
This sets both beats to loop continuously while you hold down a note.
Turn off the Velocity On button in the modulation rack.
When triggering loops, it can be helpful to turn off velocity control of the playback level so the loops trigger with the same loudness regardless of how hard you play. If the modulation area doesn’t show this parameter, click the Global button, then click the center of the Master Volume knob shown at the upper right.
Click the Morph button at the left to show the morphing section at the upper right, then drag the handle in the middle of the morph control area from left to right to hear the level of each source crossfade.
The default view shows XY set to crossfade, not morph, between the sources.
Select one of the two morph buttons in the morphing section to access the elemental morphing controls. Because there are only two sources, click the Morph Linear button, then click the A-B button to limit morphing to these two sources.
Drag the handle between the two sources while holding a note to create a fundamentally different effect than the crossfade between them.
What you can hear is a true morphing between discrete components of each sound. The transition isn't simply between the overall level of each sound, but between the levels of multiple narrow frequency bands and the formant characteristics of each sound.
Drag the handle to the far left, then listen as you move slowly to the right to hear a phantom shaker-like rhythm that doesn’t exist in either loop. Once you have finished exploring, move the handle back to the far left before looking at the next task.

Morph elements independently in Alchemy

In Alchemy in Logic Pro, click the Morph XY button in the morph section, then click the Elements button to access controls that allow independent morphing between different sound elements, as opposed to morphing all sonic aspects simultaneously.
Play C3 on your keyboard, then rotate the Spectral/Granular knob to move the Spectral control handle (orange dot) from left to right. You can also drag the orange dot if not obscured by another dot.
You can hear the spectral components of the first loop transition to those of the second loop. The change is similar to that heard in step 10 of the previous task, but the phantom shaker rhythm is clearer, and the kick sound from the Lockstep Beat remains intact longer. In fact, this combination causes the kick to change tone and become more pronounced at beat 1 of each bar. When the Spectral control is full right, the original kicks are replaced by a pronounced “thump” at the head of each bar.

Morph pitch and formants in Alchemy

In Alchemy in Logic Pro, move the Pitch handle (green dot) from left to right. You can also rotate the Pitch knob.
Drum beats don’t generally contain much pitched information, so use of the Pitch control may have little impact when working with loops. In this case, however, setting Pitch to the far right position results in the prominent high tom of the Insider Groove Beat becoming louder near beat 2. Only the tail of the pitch pushes through however, creating an eighth note rhythm that starts near beat 3.
Set Formant (purple dot) to 75%-100% to make the onset of the tom pitch more clearly audible. You can also rotate the Formant knob to set this value.
Set the Spectral knob to zero.
You can hear the arc of the tom hit, but without tonal characteristics because there’s little spectral material at this point in the Lockstep loop. This demonstrates the important role that resonances play in human perception of pitch information.

Assign performance controls to morphed drum loop elements in Alchemy

In Alchemy in Logic Pro, Control-click the Position knob for source A, then choose Add Modulation > LFO > LFO 1 from the shortcut menu.
In the modulation section, click the Shape pop-up menu for LFO 1 and choose Basic > RampUp.
Turn off Bipolar mode for the LFO, and set Rate to the same number of beats as the loop. For example, set the Rate knob to 4 beats for a one-bar loop, or to 8 beats for a two-bar loop, and so on.
Control-click the Position knob for source A, and choose Copy Modulation from the shortcut menu.
Click the source B button to view source B parameters.
Control-click the Position knob for source B, and choose Paste Modulation from the shortcut menu.
The playback position of both loops is now controlled by LFO 1, and they play back in sync with the project tempo.
Click the Morph button to view morphing parameters, then click the Morph Lin button.
Click the A-B button to use the X knob to morph between the two time-aligned drum loops.
As an optional step, you can click the Elements button to use or assign element controls.
- Control-click the Spect/Gran knob (orange dot), and choose Add Modulation > Perform > XYPad 1X from the shortcut menu.
- Control-click the Pitch knob (green dot), and choose Add Modulation > Perform > XYPad 1Y from the shortcut menu.
  You can now use the left X/Y pad in the Perform section to morph the spectral data by moving the pointer horizontally. You can morph pitch data by moving the pointer vertically.
- Control-click the Formant knob (purple dot), and choose Add Modulation > Perform > XYPad 2X from the shortcut menu.
- Control-click the Envelope knob (yellow dot), and choose Add Modulation > Perform > XYPad 2Y from the shortcut menu.
  You can now use the right X/Y pad in the Perform section to morph the formant filters by moving the pointer horizontally. You can morph the envelope shape by moving the pointer vertically.

Download the guides:

Logic Pro User Guide: PDF

Logic Pro Instruments: PDF

Logic Pro Effects: PDF

Control Surfaces Support Guide: PDF

Helpful?

Logic Pro User Guide for Mac

Morph drum beats in Alchemy in Logic Pro for Mac

Import and morph multiple drum loops in Alchemy

Morph elements independently in Alchemy

Morph pitch and formants in Alchemy

Assign performance controls to morphed drum loop elements in Alchemy