pidcodes · psychlones · Jul 17, 2015 · Jul 17, 2015 · Jul 17, 2015 · Jul 19, 2015
diff --git a/1209/5038/index.md b/1209/5038/index.md
@@ -0,0 +1,13 @@
+---
+layout: pid
+title: mdebug rswd protocol
+owner: frotz.net
+license: Apache 2.0
+site: http://github.com/swetland/mdebug/
+source: http://github.com/swetland/mdebug/
+---
+mdebug is a debugger for Cortex-M MCUs, including host debugger tools
+and firmware for the inexpensive LPC Link 2 debug probe board.
+
+This PID indicates support for the Remote Serial Wire Debug Protocol
+which the mdebug host tools and firmware speak over USB.
diff --git a/1209/5039/index.md b/1209/5039/index.md
@@ -0,0 +1,10 @@
+---
+layout: pid
+title: lpcboot protocol
+owner: frotz.net
+license: Apache 2.0
+site: http://github.com/swetland/mdebug/
+source: https://github.com/travisg/lk/tree/master/app/lpcboot
+---
+lpcboot is a very simple bootloader protocol used to reflash frotz.net
+embedded projects, most notably the mdebug debugger firmware.
diff --git a/1209/6742/index.md b/1209/6742/index.md
@@ -0,0 +1,8 @@
+---
+layout: pid
+title: Atomic Force Microscope
+owner: cubitel
+license: GPLv3
+site: http://npk.cubitel.org/?/hardware/afm
+source: https://github.com/cubitel/afm
+---
diff --git a/1209/8472/index.md b/1209/8472/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: OpenDeck
+owner: shanteacontrols
+license: GPLv3
+site: http://shanteacontrols.wordpress.com
+source: http://github.com/paradajz/OpenDeck
+---
+OpenDeck platform allows anyone to build a custom MIDI controller in a simple and intuitive way.
diff --git a/1209/A033/index.md b/1209/A033/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Memtype
+owner: area0x33
+license: CC-BY-4.0 
+site: http://www.area0x33.com/blog/?page_id=329
+source: https://github.com/jim17/memtype
+---
+MemType is an open source device that types passwords and usernames for you. It stores all your credential information encrypted and types it automagically when you need it.
diff --git a/1209/A800/index.md b/1209/A800/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: WebLight
+owner: sowbug.com
+license: BSD-2-Clause
+site: https://sowbug.github.io/weblight/
+source: https://github.com/sowbug/weblight
+---
+[WebUSB](https://reillyeon.github.io/webusb/)-controlled LED.
diff --git a/1209/ACE5/index.md b/1209/ACE5/index.md
@@ -0,0 +1,8 @@
+---
+layout: pid
+title: Panel Ace
+owner: SimAces
+license: MIT
+site: https://github.com/btodoroff/simaces/blob/master/README.md
+source: https://github.com/btodoroff/simaces
+---
diff --git a/1209/ACED/index.md b/1209/ACED/index.md
@@ -0,0 +1,14 @@
+---
+layout: pid
+title: Ja Rule Device
+owner: openlightingproject
+license: LGPL
+site: https://docs.openlighting.org/ja-rule/doc/latest/
+source: https://github.com/OpenLightingProject/ja-rule
+---
+
+An open source [DMX512](https://en.wikipedia.org/wiki/DMX512) /
+[RDM](https://en.wikipedia.org/wiki/RDM_(lighting)) transceiver.
+
+The code can operate as either a DMX/RDM controller or a DMX/RDM receiver /
+responder.
diff --git a/1209/ACEE/index.md b/1209/ACEE/index.md
@@ -0,0 +1,10 @@
+---
+layout: pid
+title: Ja Rule Bootloader
+owner: openlightingproject
+license: LGPL
+site: https://docs.openlighting.org/ja-rule/doc/latest/
+source: https://github.com/OpenLightingProject/ja-rule
+---
+
+DFU Boot loader for the [Ja Rule device](http://pid.codes/1209/ACED/).
diff --git a/1209/B007/index.md b/1209/B007/index.md
@@ -0,0 +1,13 @@
+---
+layout: pid
+title: Global_Boot
+owner: Konsgn
+license: GPLv2
+site: https://github.com/konsgn/Global_Boot
+source: https://github.com/konsgn/Global_Boot
+---
+A universal USB bootloader for microcontrollers based on the halfkay protocol
+
+This is just a project to make a simple python programmer be able to load code onto various usb capable microcontrollers.
+Within the Global boot firmware directory will be bootloader firmware for various uC's that allow them all to be programmed from the same script.
+The Halfkay protocol was made by Paul J Stoffregen for the teensy platform. 
diff --git a/1209/CAEA/index.md b/1209/CAEA/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Chimaera
+owner: OpenMusicKontrollers
+license: Artistic 2.0 (firmware, software) CERN OHL 1.2 (hardware design)
+site: http://open-music-kontrollers.ch/chimaera/
+source: http://open-music-kontrollers.ch/chimaera/sources/
+---
+The Chimaera is an expressive libre music controller.
diff --git a/1209/DA42/index.md b/1209/DA42/index.md
@@ -0,0 +1,11 @@
+---
+layout: pid
+title: dap42 debug access probe
+owner: devanlai
+license: LGPLv3
+site: https://github.com/devanlai/dap42
+source: https://github.com/devanlai/dap42
+---
+dap42 is a low cost and low-part-count open source hardware+firmware design for a CMSIS-DAP debug probe for ARM targets using Serial Wire Debug.
+
+It can be used as a standalone debugger or integrated into a larger design as an on-board debugger.
diff --git a/1209/DC21/index.md b/1209/DC21/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Dual Charger
+owner: FPGA-Computer
+license: CC BY-NC-SA 4.0
+site: https://hackaday.io/project/4993-dual-channel-battery-chargeranalyzer
+source: http://github.com/FPGA-Computer/Battery-Analyzer
+---
+Dual Channel Battery Charger/Analyzer s an efficient dual channel battery charger/analyzer for maintaining rechargeable batteries with programmable parameters and logging.
diff --git a/1209/DDDD/index.md b/1209/DDDD/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: OpenCVMeter
+owner: stephanelectronics 
+license: GPLv3
+site: https://www.kickstarter.com/projects/limpkin/opencvmeter-rediscover-your-capacitors
+source: https://github.com/limpkin/capmeter
+---
+The OpenCVMeter is an open source tool to measure capacitance and leakage current as a function of a capacitor's working voltage.
diff --git a/1209/EAEA/index.md b/1209/EAEA/index.md
@@ -0,0 +1,13 @@
+---
+layout: pid
+title: Controller
+owner: Pinscape
+license: MIT
+site: https://developer.mbed.org/users/mjr/code/Pinscape_Controller/
+source: https://developer.mbed.org/users/mjr/code/Pinscape_Controller/
+---
+The Pinscape Controller is software for the Freescale KL25Z microcontroller
+board that implements an I/O controller for virtual pinball cabinets.  The
+controller provides mechanical analog plunger input sensing (with a couple
+of choices of sensor type), key input, accelerometer-based nudge sensing,
+and feedback device output control.  
diff --git a/1209/F3FC/index.md b/1209/F3FC/index.md
@@ -0,0 +1,8 @@
+---
+layout: pid
+title: Flight controller-Lumenier Lux
+owner: dronin
+license: GPLv3
+site: http://github.com/d-ronin/dronin/
+source: http://github.com/d-ronin/dronin/
+---
diff --git a/1209/FA57/index.md b/1209/FA57/index.md
@@ -0,0 +1,8 @@
+---
+layout: pid
+title: Pilot Board
+owner: 3DRacers
+license: Creative Commons Share-Alike 4.0
+site: http://www.3dracers.com/
+source: http://github.com/3DRacers/PilotBoard
+---
diff --git a/1209/FA58/index.md b/1209/FA58/index.md
@@ -0,0 +1,8 @@
+---
+layout: pid
+title: Pilot Board (Bootloader)
+owner: 3DRacers
+license: Creative Commons Share-Alike 4.0
+site: http://www.3dracers.com/
+source: http://github.com/3DRacers/PilotBoard
+---
diff --git a/1209/FAB1/index.md b/1209/FAB1/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: LamDiNao
+owner: PAPCoDienTu
+license: Creative Commons ShareAlike 4.0 International
+site: http://papcodientu.com
+source: https://github.com/papcodientu/LamDiNao
+---
+LamDiNao, in Vietnamese called Làm Ði Nào, is an electronic board allowing physical connection between people and computer. The board has 5 basic buttons, such as: UP, DOWN, LEFT, RIGHT, CLICK and SPACE; in addition, it also has 13 extra ports which has similar functionality as 5 basic buttons.
diff --git a/1209/bade/index.md b/1209/bade/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: SemarmeHID
+owner: semarme
+license: GPL V2.0
+site: http://github.com/carakatama/SemarmeHID/
+source: http://github.com/carakatama/SemarmeHID/
+---
+USB Hardware with 8 bit input, 8 bit output, and 2 analog chanel for interfacing practice
diff --git a/howto.md b/howto.md
@@ -10,6 +10,8 @@ If your project does not meet the following criteria, your pull request **will**
 - Containing schematics or source code for a device with a USB interface...
 - Licensed under a recognized open source or open source hardware license. Your source code repository must contain a LICENSE file attesting to this fact.

+If your project involves both hardware and software, both need to be licensed under recognised OSS and OSHW licenses. If your project involves only one or the other, we may ask for further justification as to why you need a PID associated with your software project / development board instead of allowing end-users to request their own.
+
 If your project doesn't yet meet these requirements, please hold off requesting a PID until it does. Don't worry, we're not likely to run out of PIDs soon.

 ## 1. Fork us
@@ -44,6 +46,8 @@ source: http://github.com/myorg/mydevice/
 ---
 ```

+The `title` field is what will appear on the pid.codes directory. Titles will be prefixed with the name of your organisation, so don't include that in the title. Try and pick a name you'd want to see in Device Manager or dmesg.
+
 For the `owner` field, specify the name of the directory you created for your organisation in step 2. For license, you must name a valid open-source license; pull requests that do not have this field filled out correctly will be rejected.

 The `site` field may point to any relevant URL about your project. The `source` field must point to a URL at which users can find the source code for your device; this includes both PCB designs and firmware. This does not have to be on GitHub.

diff --git a/org/3DRacers/index.md b/org/3DRacers/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: 3DRacers
+---
+[3DRacers](http://www.3dracers.com/) is a fully customizable racing game with mobile app and Open Hardware.
diff --git a/org/FPGA-Computer/index.md b/org/FPGA-Computer/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: FPGA-Computer
+---
+I'm just a hobbyist. https://hackaday.io/projects/hacker/10708
diff --git a/org/Konsgn/index.md b/org/Konsgn/index.md
@@ -0,0 +1,4 @@
+---
+layout: org
+title: Konsgn
+---
diff --git a/org/OpenMusicKontrollers/index.md b/org/OpenMusicKontrollers/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: Open Music Kontrollers
+---
+We are a small manufactury designing libre hardware and accompanying software to provide you with adaptable human-machine interfaces in the domain of expressive electronic music.
diff --git a/org/PAPCoDienTu/index.md b/org/PAPCoDienTu/index.md
@@ -0,0 +1,7 @@
+---
+layout: org
+title: PAP Mechatronic Technology
+---
+We would like to build a business to promote and drive the Maker movement and technology education at younger age in Vietnam. We aim to achieve this goal by selling products and providing teaching resources for the DIY/makers and education communities in Vietnam.
+
+Some example products are: Arduino, Raspberry Pi, sensors, 3D printers, robots, technology kits.
diff --git a/org/Pinscape/index.md b/org/Pinscape/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: Pinscape
+---
+An open source I/O controller for virtual pinball cabinets.
diff --git a/org/SimAces/index.md b/org/SimAces/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: SimAces
+---
+Working on a USB device using Cypress PSoC5 LP for simulation interfaces
diff --git a/org/area0x33/index.md b/org/area0x33/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: area0x33
+---
+Area0x33 are two engineers which make open source projects. You can find us at www.area0x33.com/blog
diff --git a/org/cubitel/index.md b/org/cubitel/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: NPK Cubitel
+---
+We are small hardware/software developers.
+We make devices for automation, but also we make some devices just for fun.
diff --git a/org/devanlai/index.md b/org/devanlai/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: Devan Lai
+---
+I'm an engineer with that wants to build and use open source tools.
diff --git a/org/dronin/index.md b/org/dronin/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: dRonin
+---
+Open source firmware for popular flight controllers
diff --git a/org/frotz.net/index.md b/org/frotz.net/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: frotz.net
+---
+Brian Swetland's Various Personal Projects.
+Mostly embedded systems and OS development related.
diff --git a/org/openlightingproject/index.md b/org/openlightingproject/index.md
@@ -0,0 +1,8 @@
+---
+layout: org
+title: Open Lighting Project
+---
+The [OpenLightingProject](https://www.openlighting.org/) builds open source
+hardware and software for the entertainment lighting industry. Protocol
+support includes [DMX512](https://en.wikipedia.org/wiki/DMX512),
+[RDM](https://en.wikipedia.org/wiki/RDM_(lighting)) and others.
diff --git a/org/semarme/index.md b/org/semarme/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: Semarme
+---
+We make opensource hardware/software for education
diff --git a/org/shanteacontrols/index.md b/org/shanteacontrols/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: Shantea Controls
+---
+Custom MIDI controllers.
diff --git a/org/sowbug.com/index.md b/org/sowbug.com/index.md
@@ -0,0 +1,5 @@
+---
+layout: org
+title: sowbug.com
+---
+Mike Tsao's hobby projects.
diff --git a/org/stephanelectronics/index.md b/org/stephanelectronics/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: Stephan Electronics
+---
+Stephan Electronics was founded by Mathieu Stephan, creator of limpkin.fr
+Created products range from sensors for domotics uses, capacitance meters, development platforms...