An openFrameworks addon to send commands to video projectors over a network
- PJLink (most projectors)
- NEC projector
- CHRISTIE, SANYO and EPSON via raw string commands
- PROJECTION DESIGN (Now BARCO)
- ofxNetwork core addon
http://pjlink.jbmia.or.jp/english/data/5-1_PJLink_eng_20131210.pdf
"PJLink enables central control of projectors manufactured by different vendors and projectors can be operated by a controller."
bool On(); //command to turn the projector on
bool Off(); //command to turn the projector off
bool sendPJLinkCommand(string command); //send any PJLink command to the projector
void setup(string IP_add="192.168.0.100",int protocol=PJLINK_MODE, string password=""); //default
void setProjectorType(int protocol); //NEC_MODE, PJLINK_MODE, etc
void setProjectorIP(string IP_add); //the network IP of the projector
void setProjectorPassword(string passwd); //password for PJLink authentication
bool getProjectorStatus(); //return whether projector is on (true) or off (false)
void setProjectorPort(int port); //the network port of the projector
bool sendCommand(string command); //send any string command to the projector without password authentication
PJLINK_MODE
NEC_MODE
CHRISTIE_MODE
SANYO_MODE
PJDESIGN_MODEStep 1. in the testApp.h:
#include "ofxPJControl.h"
ofxPJControl projector1;Step 2. in the testApp.cpp:
//Your projectors IP, and if its not PJLINK try another mode.
projector1.setup("192.168.1.281",PJLINK_MODE,"mypassword");
projector1.On();
projector1.Off();