PY32F0xx MCU CMSIS, BSP, HAL, LL, Examples

docs : decaday/PY32_Docs

CMSIS, BSP, HAL, LL comes from Puya data packages:

PY32F002B_230807
PY32F002B_231026
PY32L020_231018

PY32F030 & PY32F003 &PY32F002A_230410

PY32F040_230807
PY32F040_231018
PY32F040_231115

PY32F072&PY32F071&PY32F070_230703
PY32F072&PY32F071&PY32F070_231115

https://github.com/ARM-software/CMSIS-DSP

https://www.keil.arm.com/packs/py32f0xx_dfp-puya/

LDScripts and gcc startup files comes from https://github.com/IOsetting/py32f0-template

This document describes the CMake configuration options for the py32-drivers project.

set(MCU_MODEL "PY32F030x6" CACHE STRING "MCU model, like PY32F030x6")

Specifies the target MCU model for compilation. Set this variable to match your hardware.

The following MCU models are supported:

• PY32F002Ax5
• PY32F002Bx5
• PY32F003x4, PY32F003x6, PY32F003x8
• PY32F030x4, PY32F030x6, PY32F030x7, PY32F030x8

option(ENABLE_HAL_DRIVER "Enable HAL driver" ON)

• When ON: Includes the Hardware Abstraction Layer (HAL) driver
• Default: ON

option(ENABLE_LL_DRIVER "Enable LL driver" ON)

• When ON: Includes the Low-Level (LL) driver
• Default: ON

option(ENABLE_SYSTEM_XXX_C "Enable system_XXX.c" ON)

• When ON: Includes the system configuration source file
• Default: ON

option(ENABLE_STARTUP_FILE "Enable startup file" ON)

• When ON: Includes the MCU startup file
• Default: ON

option(ENABLE_LD_SCRIPT "Enable linker script" ON)

• When ON: Includes the linker script for memory layout
• Default: ON

option(ENABLE_DEBUG_DEFINE "Enable debug define" ON)

• When ON: Enables HAL debug symbols and definitions（-DDEBUG）
• Default: ON

To configure your build, you can:

1. Use CMake GUI:

   cmake-gui /path/to/source

2. Use command line:

   cmake -DMCU_MODEL=PY32F030x6 -DENABLE_HAL_DRIVER=ON -DENABLE_LL_DRIVER=ON /path/to/source

3. Or modify CMakeCache.txt directly after initial configuration.