dependencyResolutionManagement {
  repositoriesMode.set(RepositoriesMode.FAIL_ON_PROJECT_REPOS)
  repositories {
    mavenCentral()
    maven { url 'https://jitpack.io' }
  }
}

implementation 'com.github.Yiwei099:PrintSupport:$releaseVersion'

由于本库设置的版本要求为：
compileSdkVersion = 33
targetSdkVersion = 33
minSdkVersion = 24
可能会有很多项目没适配，可以把 module 下载下去修改版本进行依赖

//局域网通讯
val key = "192.168.100.150"
val printer = EscNetGPrinter(context, netKey) //打印Esc
val printer = TscNetGPrinter(context,netKey) //打印Tsc

//USB通讯(SerialNumber为可选)
val usbKey = "vendorId+productId+SerialNumber"
val printer = EscUsbGPrinter(context,vendorId,productId,serialNumber) //打印Esc
val printer = TscUsbGPrinter(context,vendorId,productId,serialNumber) //打印Tsc

//蓝牙通讯
val macAddress = "66:22:E2:4C:CB:DD"
val printer = EscBtGPrinter(context,macAddress) //打印Esc
val printer = TscBtGPrinter(context,macAddress) //打印Tsc

//未明确指令类型

//自己打印机校验指令的指令
val command :ByteArray = ByteArray()
val unknowBtPrinter = UnKnowBtGPrinter(context,address,command){
    //...解析打印机返回数据，获取指令类型，并返回指令类型告知打印机
    return when(data){
        ...-> Command.Esc
        ...-> Command.Tsc
        else-> null
    }
}

//以图片的形式打印
//从 1.2.0 或1.2.0-Alpha版本开始，如果您的标签内容高度非自适应则需要指定标签高度
val mission = GraphicMission(
                bitmapArray,
                bitmapHeight:Int = 30,//标签高度
                bitmapWidth:Int = 40,//标签宽度
                selfAdaptionHeight:Boolean = false,//固定高度
              )

//以SDK指令形式打印
val mission = CommandMission(escCommand)

//调用addMission即可
printer.addMission(mission)

printer.onDestroy()

//通讯方式：局域网/USB/蓝牙
val interface = Net/Usb/BlueTooth

//通讯地址：局域网IP/USB地址/蓝牙地址
val target = "192.168.0.1"

//创建打印机，必要时可指定Epson打印机的型号
val printer = EpsonPrinter(context,interface,target)

//以图片的形式打印
//从 1.2.0 或1.2.0-Alpha版本开始，如果您的标签内容高度非自适应则需要指定标签高度
val mission = GraphicMission(
                bitmapArray,
                bitmapHeight:Int = 30,//标签高度
                bitmapWidth:Int = 40,//标签宽度
                selfAdaptionHeight:Boolean = false,//固定高度
              )

//以SDK指令形式打印
val mission = EpsonMission(
                mutableListOf<BaseEpsonMissionParam>().apply {
                    add(CommandMissionParam(getOpenBoxCommandByByteArray()))
                }
              )

//调用addMission即可
printer.addMission(mission)

printer.onDestroy()

//检索参数(局域网/蓝牙/USB)，(打印机/扫码枪/输入设备)
val option = FilterOption()
//监听结果(返回单个设备)
val listener = DiscoveryListener()

//开始检索
Discovery.start(mContext,option,listener)

//结束检索
Discovery.stop()

//建议在 Application 初始化时调用
BixolonUtils.getInstance().initLibrary()

//局域网通讯
val key = "192.168.100.155"
val printer = BixolonNetLabelPrinter(mContext)

//以图片的形式打印
//从 1.2.0 或1.2.0-Alpha版本开始，如果您的标签内容高度非自适应则需要指定标签高度
val mission = GraphicMission(
                bitmapArray,
                bitmapHeight:Int = 30,//标签高度
                bitmapWidth:Int = 40,//标签宽度
                selfAdaptionHeight:Boolean = false,//固定高度
              )
printer.addMission(mission)

printer.onDestroy()

//任意存在或不存在的IP地址
val ip = "192.168.3.12"

//创建任意必胜龙打印机
val printer = BixolonNetLabelPrinter(mContext,ip).apply{
    setOnFindPrinterCallBack {
        it.forEach {content->
            //返回的结果，结构为：macAddress + address + port
        }
    }
}

//开始检索
printer.startFindPrinter()

//实例化打印机
val printer = NativeUsbPrinter(
                mContext: Context, //上下文对象
                usbDevice: UsbDevice, //USB设备实例
                commandType:Command, //指令类型：ESC/TSC
                bufferSize: Int = 16384, //缓冲区大小
                timeOut: Int = 3000, //超时时间
                density: DENSITY = LabelCommand.DENSITY.DNESITY1, //打印浓度
                adjustX: Int = 0, //左侧偏移
                adjustY: Int = 0, //顶部偏移
              )

//以图片的形式打印
//从 1.2.0 或1.2.0-Alpha版本开始，如果您的标签内容高度非自适应则需要指定标签高度
val mission = GraphicMission(
                bitmapArray,
                bitmapHeight:Int = 30,//标签高度
                bitmapWidth:Int = 40,//标签宽度
                selfAdaptionHeight:Boolean = false,//固定高度
              )

//以SDK指令形式打印
val mission = CommandMission(escCommand)

//调用addMission即可
printer.addMission(mission)

printer.onDestroy()

//佳博打印机开钱箱
printer.addMission(GPrinterMission(GPrinterMission.getOpenBoxCommand()))

//其它打印机开钱箱：如 Epson
printer.addMission(
    EpsonMission(
        mutableListOf<BaseEpsonMissionParam>().apply {
            add(CommandMissionParam(getOpenBoxCommandByByteArray()))
        }
    )
)

//佳博SDK开钱箱Byte指令
private fun getOpenBoxCommandByByteArray(): ByteArray {
    return SDKUtils.convertVectorByteToBytes(GPrinterMission.getOpenBoxCommand())
}
                

//建议在 Application 初始化时调用
BixolonUtils.getInstance().initLibrary()

override fun onUsbAttached(intent: Intent) {
    intent.getParcelableExtra<UsbDevice>(UsbManager.EXTRA_DEVICE)?.let {usbDevice->
        val b = usbManager.hasPermission(usbDevice)
        val usbKey = "${usbDevice.vendorId}-${usbDevice.productId}"
        if (!b){
            val mPermissionIntent = PendingIntent.getBroadcast(this,0,Intent(UsbBroadcastReceiver.ACTION_USB_PERMISSION),0)
            usbManager.requestPermission(it, mPermissionIntent)
            //授权后无需再进行任何操作，打印机内部会定时轮询自动执行打印
        }
}