 
SuperSpeed USB Compliance Testing
|
SuperSpeed
USB certification testing is now available at several certified
independent test labs for all SuperSpeed USB peripherals, peripheral
silicon, and end user hosts using certified host silicon .For a list of
eligible labs and contact information, please visit our Independent Test Lab page.
The
SuperSpeed USB Platform Interoperability Lab (PIL) is available for
assistance with SuperSpeed product development. The lab is open for
USB-IF members only. More information can be found on the SuperSpeed USB PIL testing page. Download the USB-IF Trademark License Agreement and Usage Guidelines for the USB-IF Logos.
SuperSpeed USB Index
SuperSpeed Checklists
Electrical Compliance Test Specification
xHCI Interoperability Test Procedures
xHCI Backwards Compatibility Test Procedures
Link Test Specification
USB 3.0 Cable and Connector Compliance Document
USB On-The-Go and Embedded Host 3.0
USB 3.0 Certification Platform
SuperSpeed USB ChecklistsPlease visit the Compliance Checklists page to download the appropriate checklist.
Electrical Compliance Test Specification
The Electrical Compliance Test Specification for SuperSpeed USB Rev. 1.0a (Updated March 30,2014) is now available.
xHCI Interoperability Test Procedures For Peripherals, Hubs,
Hosts
The xHCI Interoperability Test Procedures For Peripherals, Hubs,Host Rev 1.59 (Updated April 3, 2015) is now available. Interoperability Test Procedures For PC to PC Bridge Rev 1.2 (Updated May 14, 2014)
xHCI Backwards Compatibility Test Procedures For Hosts
The xHCI Backwards Compatibility Test Procedures For Hosts Rev 1.6 (Updated December 23, 2013) is now available. |
Link Test SpecificationUSB 3.1 Link Layer Test Specification (Updated November 19, 2015) Link Test Specification for Hosts, Hubs and Peripherals (Updated August 2, 2013) USB 3.0 Hub LVS Test Specification
USB 3.0 Cable and Connector Compliance DocumentThe USB 3.0 Cable and Connector Compliance Document Rev 1.0 is available. USB On-The-Go and Embedded Host 3.0The Compliance Plan for USB On-The-Go and Embedded Host 3.0 - Release 1.0 is available.
USB 3.0 Certification Platform
Hosts,
hubs and peripherals must be certified using Windows 8.1 (64-bit OS).
USB-IF uses DELL XPS8700 (4th
Generation Intel® Core™ i7 Processor, 8 GB Memory) and testing is performed using the
on-board Intel host controller (Z87 Chipset). The latest Microsoft USB
driver stack is used, and is updated by running Windows Update. The BIOS
should be updated to the latest version, and can be downloaded from the Dell website (Link for DELL XPS8700: http://www.dell.com/us/p/xps-8700/pd?oc=fdcwgp1312&model_id=xps-8700). Please follow
the PDK TechGuide document (TechGuide_xHCI_SSUSB_PDK_Ver1.9) for modifications
to the DELL XPS8700 system. If you have further questions about the
system configuration, email ssusbcompliance@usb.org.
Please
note the following testing requirements:
- Peripherals
and hubs must verify LPM L1 Interoperability using the Fresco Logic FL100 xHHCI host controller.
- If a peripheral supports UASP, it must also have
interoperability tested on Windows 7 using the Fresco host controller.
This will validate BOT functionality
|
