Roland SI-24 channel strips in Logic Pro

The table outlines the channel strip controls and their assignments.

Note: A modifier button (such as SHIFT) shown below a button description indicates that the button has an alternate use while the modifier is held down.

Control	Modifier	Assignment
EQ ON/OFF 1 to 4		In Pan mode: Switches the bypass state of EQ bands 1–4. Enters EQ/Send mode. If no Channel or Linear Phase EQ is present on the selected channel, a Channel EQ is automatically inserted. In EQ/Send mode: Switches the bypass state of EQ bands 1–4. The button LED is lit when the EQ is enabled. In Plug-in mode: Switches between Inserts 1–4. A lit button LED indicates the selected Insert slot. If a plug-in window is open, it updates to reflect the plug-in parameters of the selected Insert slot.
	SHIFT	In EQ/Send mode: Enables or disables Send 1–4 Mute.
EQ/SEND		Switches Channel views between: EQ/Send Edit mode (LED on). Pan Edit mode (LED off).
PLUG-IN		Switches Channel views between: Plug-in Edit mode (LED on). (Plug-in window opens.) Pan Edit mode (LED off). Plug-in window closes when Plug-in Edit mode is exited.
	SHIFT	Switches Channel views between: Instrument Edit mode (LED on). (Instrument window opens.) Pan Edit mode (LED off). Instrument plug-in window closes when Instrument Edit mode is exited.
PAN 1 to 12		In Pan Edit mode: Controls channel strip Pan/Balance (surround angle for channels in surround mode). In EQ/Send mode: 1/3/5/7: Control the Gain parameter of EQ bands 1–4. 2/4/6/8: Control the Frequency parameter of EQ bands 1–4. 9–12: Control Send 1–4 levels. In Plug-in Edit mode: 1–10: Edits plug-in parameter. 11: Bypasses the plug-in. 12: Shifts plug-in parameter page. (A page is a collection of parameters.) In Instrument mode: 1–10: Edits Instrument parameter. 11: Bypasses the instrument plug-in. 12: Shifts Instrument parameter page.
	SHIFT	In EQ/Send mode: 2/4/6/8: Control the Q-Factor of EQ bands 1–4. 9–12: Determine Send 1–4 destinations.
CH SELECT 1 to 12		Selects track/channel.
STATUS 1 to 12		In Automation mode: Switches Automation mode between: Off (LED off) Read (green) Latch (orange) Write (red) In Record Ready mode: Turns Record Enable on or off. In Solo mode: Enables or disables Solo. In Mute mode: Enables or disables Mute.
Fader 1 to 12		Controls volume.
Master fader		Controls the master channel strip.

Download the guides:

Logic Pro User Guide: PDF

Logic Pro Instruments: PDF

Logic Pro Effects: PDF

Control Surfaces Support Guide: PDF

ସହାୟକ କି?

Control Surfaces Support Guide for Logic Pro

Roland SI-24 channel strips in Logic Pro