Logic Pro for iPad 3.3
Logic Pro for iPad 3.0
Logic Pro for iPad 2.2
Logic Pro for iPad 2.1
Logic Pro for iPad 2.0
Logic Pro for iPad 1.1
Logic Pro for iPad 1.0
ഈ കൺട്രോളിൽ മാറ്റം വരുത്തുന്നത് ഈ പേജ് ഒട്ടോമാറ്റിക്കായി അപ്ഡേറ്റ് ചെയ്യാനിടയാക്കും

Phat FX global controls in Logic Pro for iPad

The Phat FX global controls include the Effects order strip, which you can use to turn on or turn off individual effects and to reposition effects within the effects chain. The XY pad provides real-time control of up to four target parameters. The Master section parameters provide global input, output, and mix level control.

Effects order strip

The order and status of active and inactive effects units are indicated in the strip. Inactive effects are dimmed, and active effects are illuminated. The signal flow runs from left to right.

Tap an effect name to turn it on or to turn it off.

Figure. Phat FX Effects order strip shown at top of the plug-in window.

Effects order strip: Drag the name of an active (lit) or inactive (dimmed) effect horizontally to change the effects order.

XY pad parameters

The XY pad provides real-time control of up to four target parameters. Drag the gray control point to simultaneously modulate your targets.

Figure. Phat FX XY Pad, X Assign, and Y Assign parameter sections.

  •  XY pad: Drag the gray control point horizontally or vertically to change the value of the assigned X or Y target parameters.

  • X and Y Assign On/Off buttons: Turn on or turn off the X or Y controller. You can assign two targets to each axis, for a total of four modulations with the XY pad.

  • X Target 1/2 pop-up menus: Choose one or two modulation targets from any active effect processor, modulation source, or the master control section.

  • X Depth 1/2 fields: Drag vertically to set the modulation amount/range for the chosen X target(s).

  • Y Target 1/2 pop-up menus: Choose one or two modulation targets from any active effect processor, modulation source, or the master control section.

  • Y Depth 1/2 fields: Drag vertically to set the modulation amount/range for the chosen Y target(s).

Master controls

Figure. Phat FX XY pad and Assign X and Assign Y parameters.

  • Input Gain knob and field: Set the overall input level of the plug-in.

  • Output knob and field: Set the overall output level of the plug-in.

  •  Mix knob and field: Set the level of the original versus processed signal. This is essentially a wet/dry balance control.

  • Limiter pop-up menu: Choose soft or hard limiting, or turn off limiting.

Download this guide: PDF

Morty Proxy This is a proxified and sanitized view of the page, visit original site.
സഹായകമായോ?
കാരക്റ്റർ പരിധി: 250
പരമാവധി കാരക്റ്റർ പരിധി 250 ആണ്.
നിങ്ങളുടെ ഫീഡ്ബാക്കിന് നന്ദി.
Morty Proxy This is a proxified and sanitized view of the page, visit original site.