Attach or remove the Apple Vision Pro Light Seal or head band

The Light Seal, Light Seal Cushion, and head band are detachable, so you can take them off for cleaning, or if you want to use a different size Light Seal, Light Seal Cushion, or head band.

Attach or remove the Light Seal and Light Seal Cushion

Apple Vision Pro with the Light Seal attached to the frame.

  1. Put on the cover to protect Apple Vision Pro, then make sure your Apple Vision Pro is sitting on a stable surface, like a table or desk.

    To prevent scratches and cracks, don’t place Apple Vision Pro with the glass facing down.

  2. Do any of the following:

    • Attach the Light Seal: Align the Light Seal with the frame, with the Light Seal Cushion facing out (so it touches your face when you put it on). You should feel the Light Seal magnetically attach to the frame.

    • Attach the Light Seal Cushion: Align the Light Seal Cushion with the Light Seal, with the Light Seal Cushion facing out (so it touches your face when you put it on). You should feel the Light Seal Cushion magnetically attach to the Light Seal.

    • Remove the Light Seal: Gently pull on the Light Seal until it disconnects from the frame.

    • Remove the Light Seal Cushion: Gently pull on the Light Seal Cushion until it disconnects from the Light Seal.

Attach or remove the head band

  1. Put on the cover to protect Apple Vision Pro, then make sure your Apple Vision Pro is sitting on a secure surface, like a table or desk.

    To prevent scratches and cracks, don’t place Apple Vision Pro with the glass facing down.

  2. Do any of the following:

    • Attach the Dual Knit Band: Align the connector on either side of the Dual Knit Band with the connector on the inside of each Audio Strap (with the orange release tab facing inwards). Make sure the Fit Dial is on the right, and the size is on the left (under the orange release tab). When the connectors are aligned, push in until you hear a click.

      You may need to pull the orange release tab as you put the connector in place, then release when it’s attached.

      Apple Vision Pro with the Dual Knit Band attached. An orange release tab is visible on the inside of the Dual Knit Band.

    • Attach the Solo Knit Band: Align the connector on either side of the Solo Knit Band with the connector on the inside of each Audio Strap (with the orange release tab facing inwards), then push in until you hear a click.

      You may need to pull the orange release tab as you put the connector in place, then release when it’s attached.

      Apple Vision Pro with the Solo Knit Band attached. An orange release tab is visible on the inside of the Solo Knit Band.

    • Attach the Dual Loop Band: Make sure the size indicator is positioned on the left, with the upper strap pointing directly upwards and the lower strap oriented to go around the lower part of your head. Then align the connector on either side of the Dual Loop Band with the connector on the inside of each Audio Strap, then push in until you hear a click. Make sure to loosen the straps before putting on Apple Vision Pro.

      Apple Vision Pro with the Dual Loop Band attached. An orange release tab is visible on the inside of the Dual Loop Band.

    • Detach the head band: Pull the orange release tabs on the inside of the head band until it disconnects from the device.

Note: Before putting on Apple Vision Pro, gently pull the connection points for the head band to ensure they’re attached properly.

See alsoAdjust the fit of your Apple Vision ProClean your Apple Vision Pro
Morty Proxy This is a proxified and sanitized view of the page, visit original site.
Helpful?
Character limit: 250
Maximum character limit is 250.
Thanks for your feedback.
Morty Proxy This is a proxified and sanitized view of the page, visit original site.