Aggregate device settings
For your aggregate device to work correctly, all devices in the aggregate device need to have the same sample rate.
The sample rate of each device should match the sample rate of the device chosen from the Clock Source pop-up menu.
Set the sample rate
Click the disclosure triangle next to the name of your aggregate device.
Select one of the devices in your aggregate device, click the Format pop-up menu, then choose the sample rate and bit depth.
Repeat step 2 for all the devices in the aggregate device, using the same sample rate and bit depth for each device.
Enable drift correction
If the devices in your aggregate device aren’t synchronized using hardware, you need to enable drift correction, also known as resampling, to compensate for drift in the data between devices.
Select the aggregate device in the list.
Choose your aggregate device settings.
If all devices in the aggregate device aren’t synchronized through hardware, choose the device with the most reliable clock from the Clock Source pop-up menu. Then select the Drift Correction checkbox for each device.
If some of the devices in the aggregate device are synchronized through hardware, choose the hardware synchronization’s clock master from the “Clock source” pop-up menu. Then select the Drift Correction checkbox for each device that isn’t synchronized through hardware.
If all devices in the aggregate device are synchronized through hardware, choose the hardware synchronization’s clock master from the Clock Source pop-up menu. Make sure none of the Drift Correction checkboxes are selected.