Korg microKONTROL and KONTROL49 channel strips in Logic Pro

There are several modes for the encoders, enabled with SCENE and Pad 9–16.

Control	Assignment
LCD	Shows the parameter controlled by the encoder. The current name/value is displayed for a few seconds when you move an encoder or a fader. When the encoders are in a Mixer view (Pan, Send, Send Setup), the background color indicates the channel automation mode: Green: Off or Read Yellow: Touch or Latch Red: Write
Encoder	Controls the parameter shown directly above the encoder in the LCD.
Fader	Controls volume. Because the faders don’t offer feedback, Pickup mode is used (if enabled in the Control Surfaces settings). This means that the fader must reach (“pick up”) the current parameter value before the value starts to change.

Control

Assignment

LCD

Shows the parameter controlled by the encoder. The current name/value is displayed for a few seconds when you move an encoder or a fader.

When the encoders are in a Mixer view (Pan, Send, Send Setup), the background color indicates the channel automation mode:

Green: Off or Read
Yellow: Touch or Latch
Red: Write

Encoder

Controls the parameter shown directly above the encoder in the LCD.

Fader

Controls volume. Because the faders don’t offer feedback, Pickup mode is used (if enabled in the Control Surfaces settings). This means that the fader must reach (“pick up”) the current parameter value before the value starts to change.

Download the guides:

Logic Pro User Guide: PDF

Logic Pro Instruments: PDF

Logic Pro Effects: PDF

Control Surfaces Support Guide: PDF

Helpful?

Control Surfaces Support Guide for Logic Pro

Korg microKONTROL and KONTROL49 channel strips in Logic Pro