Edit track parameters in Logic Pro for Mac

Each track has a set of parameters. The parameters available depend on the track type (some parameters are common to all track types, while some are specific to audio tracks or software instrument tracks only). You can view and edit parameters for the selected track in the Track inspector, located below the Region and Event inspectors.

All track types have a track name, which is shown at the top of the Track inspector when the track is selected, and a track icon, which appears below the track name in the Track inspector. Other track parameters include the following:

Audio tracks

Channel: Shows the channel strip type and number for the track. The Channel parameter is not editable.
Freeze Mode pop-up menu: Choose Source Only to freeze the track signal without effect plug-ins, or choose Pre Fader to freeze the track with all effect plug-ins. See Freeze tracks.
Q-Reference checkbox: When selected, all regions on the track contribute their transients as reference points during the quantization process. See Flex tracks Quantize menu.
Flex Mode pop-up menu: Choose the flex mode for the track. See Flex Time algorithms and parameters.
Depending on which flex mode you choose, other parameters become available below the Flex Mode pop-up menu.

Software Instrument tracks

Default Region Type pop-up menu: Choose MIDI, Pattern, or Drummer to set the default region type for the track. This determines which editor opens by default when the track is selected (Piano Roll Editor, Step Sequencer, or Drummer Editor).
Channel: Shows the channel strip type and number for the track. The Channel parameter is not editable.
MIDI Input Port pop-up menu: Choose a MIDI port for the track input, all input ports, Internal & Remote (which routes input from the Musical Typing keyboard and from Logic Remote), or Logic Pro Virtual In (which can be used to receive MIDI messages from another music app on your Mac).
MIDI Input Channel pop-up menu: Choose the MIDI channel for the track input, or all input channels.
MIDI Output Channel pop-up menu: Choose the MIDI channel for the track output, or all output channels.
Freeze Mode pop-up menu: Choose Source Only to freeze the track signal without effect plug-ins, or choose Pre Fader to freeze the track with all effect plug-ins. See Freeze tracks.
Transpose pop-up menu: Choose the transposition for the track in octaves.
Velocity value slider: Click and hold the area right of the parameter name, then drag to increase or decrease the velocity for notes in all regions on the track.
Key Limit value slider: Click and hold the lower or upper key value, then drag to change the value. The two values together define the key range; any notes outside this range are not played.
Velocity (Vel) Limit value slider: Click and hold the lower or upper velocity value, then drag to change the value. The two values together define the velocity range; any notes with a velocity outside this range are not played.
Delay value slider: Click and hold to choose whether to display the delay value in ticks or in milliseconds, then drag to increase or decrease the amount of delay applied to regions on the track.
No Transpose checkbox: When selected, regions on the track are not transposed. (In other words, the Transpose Region parameter is ignored.) This can be useful for instruments assigned to drum or other samples mapped across the keyboard on a single MIDI channel.
Hermode Tuning (HMT) pop-up menu: Choose whether track MIDI data is used in HMT analysis and whether Hermode Tuning information is sent to software instrument plug-ins on the track:
- Off: MIDI data on the track is neither used for HMT analysis nor sent to plug-ins on the track.
- Analyze: MIDI data on the track is used for HMT analysis, but plug-ins on the track do not receive HMT information.
- Apply: MIDI data on the track is not used for the HMT analysis, but plug-ins on the track receive HMT information.
- Analyze & Apply: MIDI data on the track feeds HMT analysis, and plug-ins on the track receive HMT information.
Note: The HMT pop-up menu is available when the Hermode Tuning (HMT) button is selected in Tuning project settings.
No Reset checkbox: When selected, no reset messages are sent to the track’s instrument. This can be useful when using controllers for nonmusical purposes, such as Mixer automation.
Staff Style pop-up menu: Choose the default staff style for the track. See Assign staff styles to tracks.
Articulation Set pop-up menu: Choose an articulation set, or edit the current set. See Use the Articulation Set Editor.

External instrument tracks include both audio track parameters (except Q-Reference) and software instrument track parameters.

When Enable Complete Features is selected in Logic Pro > Settings > Advanced, additional track parameters are available, including Channel, Freeze Mode, Q-Reference, Delay, Flex Mode, and Staff Style parameters.

Edit track parameters for a track

In the Logic Pro Tracks area, select the track.
In the Track inspector, do any of the following:
- To edit the track name: Click the name at the top of the Track inspector, enter a new name, then press Return.
- To change the track icon: Click the icon in the Track inspector, then choose a new icon.
- To edit other track parameters: Follow the descriptions above to edit individual parameters for the selected track.

Download the guides:

Logic Pro User Guide: PDF

Logic Pro Instruments: PDF

Logic Pro Effects: PDF

Helpful?

Logic Pro User Guide for Mac

Edit track parameters in Logic Pro for Mac

Audio tracks

Software Instrument tracks

Edit track parameters for a track