plotly.graph_objects.parcoords.Dimension(arg=None, constraintrange=None, label=None, multiselect=None, name=None, range=None, templateitemname=None, tickformat=None, ticktext=None, ticktextsrc=None, tickvals=None, tickvalssrc=None, values=None, valuessrc=None, visible=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
constraintrange¶constrained. Must be an array of [fromValue, toValue] with
fromValue <= toValue, or if multiselect is not disabled,
you may give an array of arrays, where each inner array is
[fromValue, toValue].
The ‘constraintrange’ property is an info array that may be specified as:
a list or tuple of 2 elements where:
The ‘constraintrange[0]’ property accepts values of any type
The ‘constraintrange[1]’ property accepts values of any type
a 2D list where:
The ‘constraintrange[i][0]’ property accepts values of any type
The ‘constraintrange[i][1]’ property accepts values of any type
list
label¶The shown name of the dimension.
A string
A number that will be converted to a string
multiselect¶Do we allow multiple selection ranges or just a single range?
The ‘multiselect’ property must be specified as a bool (either True, or False)
name¶When used in a template, named items are created in the output
figure in addition to any items the figure already has in this
array. You can modify these items in the output figure by
making your own item with templateitemname matching this
name alongside your modifications (including visible: false
or enabled: false to hide it). Has no effect outside of a
template.
A string
A number that will be converted to a string
range¶Defaults to the values extent. Must be an array of
[fromValue, toValue] with finite numbers as elements.
The ‘range’ property is an info array that may be specified as:
a list or tuple of 2 elements where:
An int or float
An int or float
list
templateitemname¶Used to refer to a named item in this array in the template.
Named items from the template will be created even without a
matching item in the input figure, but you can modify one by
making an item with templateitemname matching its name,
alongside your modifications (including visible: false or
enabled: false to hide it). If there is no template or no
matching item, this item will be hidden unless you explicitly
show it with visible: true.
A string
A number that will be converted to a string
tickformat¶Sets the tick label formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”
A string
A number that will be converted to a string
ticktext¶Sets the text displayed at the ticks position via tickvals.
The ‘ticktext’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
ticktextsrc¶Sets the source reference on Chart Studio Cloud for ticktext.
The ‘ticktextsrc’ property must be specified as a string or as a plotly.grid_objs.Column object
tickvals¶Sets the values at which ticks on this axis appear.
The ‘tickvals’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
tickvalssrc¶Sets the source reference on Chart Studio Cloud for tickvals.
The ‘tickvalssrc’ property must be specified as a string or as a plotly.grid_objs.Column object
values¶Dimension values. values[n] represents the value of the n`th
point in the dataset, therefore the `values vector for all
dimensions must be the same (longer vectors will be truncated).
Each value must be a finite number.
The ‘values’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
valuessrc¶Sets the source reference on Chart Studio Cloud for values.
The ‘valuessrc’ property must be specified as a string or as a plotly.grid_objs.Column object
plotly.graph_objects.parcoords.Domain(arg=None, column=None, row=None, x=None, y=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
column¶If there is a layout grid, use the domain for this column in the grid for this parcoords trace .
An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]
row¶If there is a layout grid, use the domain for this row in the grid for this parcoords trace .
An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]
x¶fraction).
The ‘x’ property is an info array that may be specified as:
a list or tuple of 2 elements where:
An int or float in the interval [0, 1]
An int or float in the interval [0, 1]
list
y¶fraction).
The ‘y’ property is an info array that may be specified as:
a list or tuple of 2 elements where:
An int or float in the interval [0, 1]
An int or float in the interval [0, 1]
list
plotly.graph_objects.parcoords.Labelfont(arg=None, color=None, family=None, lineposition=None, shadow=None, size=None, style=None, textcase=None, variant=None, weight=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
color¶A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
family¶HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart- studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.
A non-empty string
lineposition¶Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.
The ‘lineposition’ property is a flaglist and may be specified as a string containing:
Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)
Any
shadow¶Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.
A string
A number that will be converted to a string
size¶An int or float in the interval [1, inf]
int|float
style¶Sets whether a font should be styled with a normal or italic face from its family.
[‘normal’, ‘italic’]
Any
textcase¶Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.
[‘normal’, ‘word caps’, ‘upper’, ‘lower’]
Any
variant¶Sets the variant of the font.
[‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]
Any
plotly.graph_objects.parcoords.Legendgrouptitle(arg=None, font=None, text=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
font¶Sets this legend group’s title font.
The ‘font’ property is an instance of Font that may be specified as:
An instance of
plotly.graph_objects.parcoords.legendgrouptitle.FontA dict of string/value properties that will be passed to the Font constructor
Supported dict properties:
color
- family
HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.
- lineposition
Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.
- shadow
Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en- US/docs/Web/CSS/text-shadow for additional options.
size
- style
Sets whether a font should be styled with a normal or italic face from its family.
- textcase
Sets capitalization of text. It can be used to make text appear in all-uppercase or all- lowercase, or with each word capitalized.
- variant
Sets the variant of the font.
- weight
Sets the weight (or boldness) of the font.
plotly.graph_objects.parcoords.Line(arg=None, autocolorscale=None, cauto=None, cmax=None, cmid=None, cmin=None, color=None, coloraxis=None, colorbar=None, colorscale=None, colorsrc=None, reversescale=None, showscale=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
autocolorscale¶Determines whether the colorscale is a default palette
(autocolorscale: true) or the palette determined by
line.colorscale. Has an effect only if in line.color is set
to a numerical array. In case colorscale is unspecified or
autocolorscale is true, the default palette will be chosen
according to whether numbers in the color array are all
positive, all negative or mixed.
The ‘autocolorscale’ property must be specified as a bool (either True, or False)
cauto¶Determines whether or not the color domain is computed with
respect to the input data (here in line.color) or the bounds
set in line.cmin and line.cmax Has an effect only if in
line.color is set to a numerical array. Defaults to false
when line.cmin and line.cmax are set by the user.
The ‘cauto’ property must be specified as a bool (either True, or False)
cmax¶Sets the upper bound of the color domain. Has an effect only if
in line.color is set to a numerical array. Value should have
the same units as in line.color and if set, line.cmin must
be set as well.
An int or float
int|float
cmid¶Sets the mid-point of the color domain by scaling line.cmin
and/or line.cmax to be equidistant to this point. Has an
effect only if in line.color is set to a numerical array.
Value should have the same units as in line.color. Has no
effect when line.cauto is false.
An int or float
int|float
cmin¶Sets the lower bound of the color domain. Has an effect only if
in line.color is set to a numerical array. Value should have
the same units as in line.color and if set, line.cmax must
be set as well.
An int or float
int|float
color¶Sets the line color. It accepts either a specific color or an
array of numbers that are mapped to the colorscale relative to
the max and min values of the array or relative to line.cmin
and line.cmax if set.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A number that will be interpreted as a color according to parcoords.line.colorscale
A list or array of any of the above
str|numpy.ndarray
coloraxis¶Sets a reference to a shared color axis. References to these
shared color axes are “coloraxis”, “coloraxis2”, “coloraxis3”,
etc. Settings for these shared color axes are set in the
layout, under layout.coloraxis, layout.coloraxis2, etc.
Note that multiple color scales can be linked to the same color
axis.
The ‘coloraxis’ property is an identifier of a particular subplot, of type ‘coloraxis’, that may be specified as the string ‘coloraxis’ optionally followed by an integer >= 1 (e.g. ‘coloraxis’, ‘coloraxis1’, ‘coloraxis2’, ‘coloraxis3’, etc.)
colorbar¶The ‘colorbar’ property is an instance of ColorBar that may be specified as:
An instance of
plotly.graph_objects.parcoords.line.ColorBarA dict of string/value properties that will be passed to the ColorBar constructor
Supported dict properties:
- bgcolor
Sets the color of padded area.
- bordercolor
Sets the axis line color.
- borderwidth
Sets the width (in px) or the border enclosing this color bar.
- dtick
Sets the step in-between ticks on this axis. Use with
tick0. Must be a positive number, or special strings available to “log” and “date” axes. If the axistypeis “log”, then ticks are set every 10^(n*dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, … set dtick to 1. To set tick marks at 1, 100, 10000, … set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, … set dtick to log_10(5), or 0.69897000433. “log” has several special values; “L<f>”, wherefis a positive number, gives ticks linearly spaced in value (but not position). For exampletick0= 0.1,dtick= “L0.5” will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use “D1” (all digits) or “D2” (only 2 and 5).tick0is ignored for “D1” and “D2”. If the axistypeis “date”, then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, setdtickto 86400000.0. “date” also has special values “M<n>” gives ticks spaced by a number of months.nmust be a positive integer. To set ticks on the 15th of every third month, settick0to “2000-01-15” anddtickto “M3”. To set ticks every 4 years, setdtickto “M48”- exponentformat
Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If “none”, it appears as 1,000,000,000. If “e”, 1e+9. If “E”, 1E+9. If “power”, 1x10^9 (with 9 in a super script). If “SI”, 1G. If “B”, 1B.
- labelalias
Replacement text for specific tick or hover labels. For example using {US: ‘USA’, CA: ‘Canada’} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html-like tags or MathJax.
- len
Sets the length of the color bar This measure excludes the padding of both ends. That is, the color bar length is this length minus the padding on both ends.
- lenmode
Determines whether this color bar’s length (i.e. the measure in the color variation direction) is set in units of plot “fraction” or in *pixels. Use
lento set the value.- minexponent
Hide SI prefix for 10^n if |n| is below this number. This only has an effect when
tickformatis “SI” or “B”.- nticks
Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to
nticks. Has an effect only iftickmodeis set to “auto”.- orientation
Sets the orientation of the colorbar.
- outlinecolor
Sets the axis line color.
- outlinewidth
Sets the width (in px) of the axis line.
- separatethousands
If “true”, even 4-digit integers are separated
- showexponent
If “all”, all exponents are shown besides their significands. If “first”, only the exponent of the first tick is shown. If “last”, only the exponent of the last tick is shown. If “none”, no exponents appear.
- showticklabels
Determines whether or not the tick labels are drawn.
- showtickprefix
If “all”, all tick labels are displayed with a prefix. If “first”, only the first tick is displayed with a prefix. If “last”, only the last tick is displayed with a suffix. If “none”, tick prefixes are hidden.
- showticksuffix
Same as
showtickprefixbut for tick suffixes.- thickness
Sets the thickness of the color bar This measure excludes the size of the padding, ticks and labels.
- thicknessmode
Determines whether this color bar’s thickness (i.e. the measure in the constant color direction) is set in units of plot “fraction” or in “pixels”. Use
thicknessto set the value.- tick0
Sets the placement of the first tick on this axis. Use with
dtick. If the axistypeis “log”, then you must take the log of your starting tick (e.g. to set the starting tick to 100, set thetick0to 2) except whendtick`=*L<f>* (see `dtickfor more info). If the axistypeis “date”, it should be a date string, like date data. If the axistypeis “category”, it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears.- tickangle
Sets the angle of the tick labels with respect to the horizontal. For example, a
tickangleof -90 draws the tick labels vertically.- tickcolor
Sets the tick color.
- tickfont
Sets the color bar’s tick label font
- tickformat
Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: h ttps://github.com/d3/d3-format/tree/v1.4.5#d3- format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”
- tickformatstops
A tuple of
plotly.graph_objects.parcoor ds.line.colorbar.Tickformatstopinstances or dicts with compatible properties- tickformatstopdefaults
When used in a template (as layout.template.dat a.parcoords.line.colorbar.tickformatstopdefault s), sets the default property values to use for elements of parcoords.line.colorbar.tickformatstops
- ticklabeloverflow
Determines how we handle tick labels that would overflow either the graph div or the domain of the axis. The default value for inside tick labels is hide past domain. In other cases the default is hide past div.
- ticklabelposition
Determines where tick labels are drawn relative to the ticks. Left and right options are used when
orientationis “h”, top and bottom whenorientationis “v”.- ticklabelstep
Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled.
tick0determines which labels are shown. Not implemented for axes withtype“log” or “multicategory”, or whentickmodeis “array”.- ticklen
Sets the tick length (in px).
- tickmode
Sets the tick mode for this axis. If “auto”, the number of ticks is set via
nticks. If “linear”, the placement of the ticks is determined by a starting positiontick0and a tick stepdtick(“linear” is the default value iftick0anddtickare provided). If “array”, the placement of the ticks is set viatickvalsand the tick text isticktext. (“array” is the default value iftickvalsis provided).- tickprefix
Sets a tick label prefix.
- ticks
Determines whether ticks are drawn or not. If “”, this axis’ ticks are not drawn. If “outside” (“inside”), this axis’ are drawn outside (inside) the axis lines.
- ticksuffix
Sets a tick label suffix.
- ticktext
Sets the text displayed at the ticks position via
tickvals. Only has an effect iftickmodeis set to “array”. Used withtickvals.- ticktextsrc
Sets the source reference on Chart Studio Cloud for
ticktext.- tickvals
Sets the values at which ticks on this axis appear. Only has an effect if
tickmodeis set to “array”. Used withticktext.- tickvalssrc
Sets the source reference on Chart Studio Cloud for
tickvals.- tickwidth
Sets the tick width (in px).
- title
plotly.graph_objects.parcoords.line.col orbar.Titleinstance or dict with compatible properties- x
Sets the x position with respect to
xrefof the color bar (in plot fraction). Whenxrefis “paper”, defaults to 1.02 whenorientationis “v” and 0.5 whenorientationis “h”. Whenxrefis “container”, defaults to 1 whenorientationis “v” and 0.5 whenorientationis “h”. Must be between 0 and 1 ifxrefis “container” and between “-2” and 3 ifxrefis “paper”.- xanchor
Sets this color bar’s horizontal position anchor. This anchor binds the
xposition to the “left”, “center” or “right” of the color bar. Defaults to “left” whenorientationis “v” and “center” whenorientationis “h”.- xpad
Sets the amount of padding (in px) along the x direction.
- xref
Sets the container
xrefers to. “container” spans the entirewidthof the plot. “paper” refers to the width of the plotting area only.- y
Sets the y position with respect to
yrefof the color bar (in plot fraction). Whenyrefis “paper”, defaults to 0.5 whenorientationis “v” and 1.02 whenorientationis “h”. Whenyrefis “container”, defaults to 0.5 whenorientationis “v” and 1 whenorientationis “h”. Must be between 0 and 1 ifyrefis “container” and between “-2” and 3 ifyrefis “paper”.- yanchor
Sets this color bar’s vertical position anchor This anchor binds the
yposition to the “top”, “middle” or “bottom” of the color bar. Defaults to “middle” whenorientationis “v” and “bottom” whenorientationis “h”.- ypad
Sets the amount of padding (in px) along the y direction.
- yref
Sets the container
yrefers to. “container” spans the entireheightof the plot. “paper” refers to the height of the plotting area only.
colorscale¶Sets the colorscale. Has an effect only if in line.color is
set to a numerical array. The colorscale must be an array
containing arrays mapping a normalized value to an rgb, rgba,
hex, hsl, hsv, or named color string. At minimum, a mapping for
the lowest (0) and highest (1) values are required. For
example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To
control the bounds of the colorscale in color space, use
line.cmin and line.cmax. Alternatively, colorscale may be
a palette name string of the following list: Blackbody,Bluered,
Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portla
nd,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.
The ‘colorscale’ property is a colorscale and may be specified as:
A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package.
A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, ‘green’], [0.5, ‘red’], [1.0, ‘rgb(0, 0, 255)’]])
- One of the following named colorscales:
- [‘aggrnyl’, ‘agsunset’, ‘algae’, ‘amp’, ‘armyrose’, ‘balance’,
‘blackbody’, ‘bluered’, ‘blues’, ‘blugrn’, ‘bluyl’, ‘brbg’, ‘brwnyl’, ‘bugn’, ‘bupu’, ‘burg’, ‘burgyl’, ‘cividis’, ‘curl’, ‘darkmint’, ‘deep’, ‘delta’, ‘dense’, ‘earth’, ‘edge’, ‘electric’, ‘emrld’, ‘fall’, ‘geyser’, ‘gnbu’, ‘gray’, ‘greens’, ‘greys’, ‘haline’, ‘hot’, ‘hsv’, ‘ice’, ‘icefire’, ‘inferno’, ‘jet’, ‘magenta’, ‘magma’, ‘matter’, ‘mint’, ‘mrybm’, ‘mygbm’, ‘oranges’, ‘orrd’, ‘oryel’, ‘oxy’, ‘peach’, ‘phase’, ‘picnic’, ‘pinkyl’, ‘piyg’, ‘plasma’, ‘plotly3’, ‘portland’, ‘prgn’, ‘pubu’, ‘pubugn’, ‘puor’, ‘purd’, ‘purp’, ‘purples’, ‘purpor’, ‘rainbow’, ‘rdbu’, ‘rdgy’, ‘rdpu’, ‘rdylbu’, ‘rdylgn’, ‘redor’, ‘reds’, ‘solar’, ‘spectral’, ‘speed’, ‘sunset’, ‘sunsetdark’, ‘teal’, ‘tealgrn’, ‘tealrose’, ‘tempo’, ‘temps’, ‘thermal’, ‘tropic’, ‘turbid’, ‘turbo’, ‘twilight’, ‘viridis’, ‘ylgn’, ‘ylgnbu’, ‘ylorbr’, ‘ylorrd’].
Appending ‘_r’ to a named colorscale reverses it.
colorsrc¶Sets the source reference on Chart Studio Cloud for color.
The ‘colorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object
reversescale¶Reverses the color mapping if true. Has an effect only if in
line.color is set to a numerical array. If true, line.cmin
will correspond to the last color in the array and line.cmax
will correspond to the first color.
The ‘reversescale’ property must be specified as a bool (either True, or False)
plotly.graph_objects.parcoords.Rangefont(arg=None, color=None, family=None, lineposition=None, shadow=None, size=None, style=None, textcase=None, variant=None, weight=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
color¶A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
family¶HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart- studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.
A non-empty string
lineposition¶Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.
The ‘lineposition’ property is a flaglist and may be specified as a string containing:
Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)
Any
shadow¶Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.
A string
A number that will be converted to a string
size¶An int or float in the interval [1, inf]
int|float
style¶Sets whether a font should be styled with a normal or italic face from its family.
[‘normal’, ‘italic’]
Any
textcase¶Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.
[‘normal’, ‘word caps’, ‘upper’, ‘lower’]
Any
variant¶Sets the variant of the font.
[‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]
Any
plotly.graph_objects.parcoords.Stream(arg=None, maxpoints=None, token=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
maxpoints¶Sets the maximum number of points to keep on the plots from an
incoming stream. If maxpoints is set to 50, only the newest
50 points will be displayed on the plot.
An int or float in the interval [0, 10000]
int|float
token¶The stream id number links a data trace on a plot with a stream. See https://chart-studio.plotly.com/settings for more details.
A non-empty string
plotly.graph_objects.parcoords.Tickfont(arg=None, color=None, family=None, lineposition=None, shadow=None, size=None, style=None, textcase=None, variant=None, weight=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
color¶A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
family¶HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart- studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.
A non-empty string
lineposition¶Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.
The ‘lineposition’ property is a flaglist and may be specified as a string containing:
Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)
Any
shadow¶Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.
A string
A number that will be converted to a string
size¶An int or float in the interval [1, inf]
int|float
style¶Sets whether a font should be styled with a normal or italic face from its family.
[‘normal’, ‘italic’]
Any
textcase¶Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.
[‘normal’, ‘word caps’, ‘upper’, ‘lower’]
Any
variant¶Sets the variant of the font.
[‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]
Any
plotly.graph_objects.parcoords.Unselected(arg=None, line=None, **kwargs)¶Bases: plotly.basedatatypes.BaseTraceHierarchyType
line¶The ‘line’ property is an instance of Line that may be specified as:
An instance of
plotly.graph_objects.parcoords.unselected.LineA dict of string/value properties that will be passed to the Line constructor
Supported dict properties:
- color
Sets the base color of unselected lines. in connection with
unselected.line.opacity.- opacity
Sets the opacity of unselected lines. The default “auto” decreases the opacity smoothly as the number of lines increases. Use 1 to achieve exact
unselected.line.color.