plotly.graph_objects.layout.polar.
AngularAxis
(arg=None, autotypenumbers=None, categoryarray=None, categoryarraysrc=None, categoryorder=None, color=None, direction=None, dtick=None, exponentformat=None, gridcolor=None, griddash=None, gridwidth=None, hoverformat=None, labelalias=None, layer=None, linecolor=None, linewidth=None, minexponent=None, nticks=None, period=None, rotation=None, separatethousands=None, showexponent=None, showgrid=None, showline=None, showticklabels=None, showtickprefix=None, showticksuffix=None, thetaunit=None, tick0=None, tickangle=None, tickcolor=None, tickfont=None, tickformat=None, tickformatstops=None, tickformatstopdefaults=None, ticklabelstep=None, ticklen=None, tickmode=None, tickprefix=None, ticks=None, ticksuffix=None, ticktext=None, ticktextsrc=None, tickvals=None, tickvalssrc=None, tickwidth=None, type=None, uirevision=None, visible=None, **kwargs)¶Bases: plotly.basedatatypes.BaseLayoutHierarchyType
autotypenumbers
¶Using “strict” a numeric string in trace data is not converted
to a number. Using convert types a numeric string in trace
data may be treated as a number during automatic axis type
detection. Defaults to layout.autotypenumbers.
[‘convert types’, ‘strict’]
Any
categoryarray
¶Sets the order in which categories on this axis appear. Only
has an effect if categoryorder
is set to “array”. Used with
categoryorder
.
The ‘categoryarray’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
categoryarraysrc
¶Sets the source reference on Chart Studio Cloud for
categoryarray
.
The ‘categoryarraysrc’ property must be specified as a string or as a plotly.grid_objs.Column object
categoryorder
¶Specifies the ordering logic for the case of categorical
variables. By default, plotly uses “trace”, which specifies the
order that is present in the data supplied. Set categoryorder
to category ascending or category descending if order
should be determined by the alphanumerical order of the
category names. Set categoryorder
to “array” to derive the
ordering from the attribute categoryarray
. If a category is
not found in the categoryarray
array, the sorting behavior
for that attribute will be identical to the “trace” mode. The
unspecified categories will follow the categories in
categoryarray
. Set categoryorder
to total ascending or
total descending if order should be determined by the
numerical order of the values. Similarly, the order can be
determined by the min, max, sum, mean, geometric mean or median
of all the values.
[‘trace’, ‘category ascending’, ‘category descending’, ‘array’, ‘total ascending’, ‘total descending’, ‘min ascending’, ‘min descending’, ‘max ascending’, ‘max descending’, ‘sum ascending’, ‘sum descending’, ‘mean ascending’, ‘mean descending’, ‘geometric mean ascending’, ‘geometric mean descending’, ‘median ascending’, ‘median descending’]
Any
color
¶Sets default for all colors associated with this axis all at once: line, font, tick, and grid colors. Grid color is lightened by blending this with the plot background Individual pieces can override this.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
direction
¶Sets the direction corresponding to positive angles.
[‘counterclockwise’, ‘clockwise’]
Any
dtick
¶Sets the step in-between ticks on this axis. Use with tick0
.
Must be a positive number, or special strings available to
“log” and “date” axes. If the axis type
is “log”, then ticks
are set every 10^(n*dtick) where n is the tick number. For
example, to set a tick mark at 1, 10, 100, 1000, … set dtick
to 1. To set tick marks at 1, 100, 10000, … set dtick to 2.
To set tick marks at 1, 5, 25, 125, 625, 3125, … set dtick to
log_10(5), or 0.69897000433. “log” has several special values;
“L<f>”, where f
is a positive number, gives ticks linearly
spaced in value (but not position). For example tick0
= 0.1,
dtick
= “L0.5” will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To
show powers of 10 plus small digits between, use “D1” (all
digits) or “D2” (only 2 and 5). tick0
is ignored for “D1” and
“D2”. If the axis type
is “date”, then you must convert the
time to milliseconds. For example, to set the interval between
ticks to one day, set dtick
to 86400000.0. “date” also has
special values “M<n>” gives ticks spaced by a number of months.
n
must be a positive integer. To set ticks on the 15th of
every third month, set tick0
to “2000-01-15” and dtick
to
“M3”. To set ticks every 4 years, set dtick
to “M48”
The ‘dtick’ property accepts values of any type
Any
exponentformat
¶Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If “none”, it appears as 1,000,000,000. If “e”, 1e+9. If “E”, 1E+9. If “power”, 1x10^9 (with 9 in a super script). If “SI”, 1G. If “B”, 1B.
[‘none’, ‘e’, ‘E’, ‘power’, ‘SI’, ‘B’]
Any
gridcolor
¶Sets the color of the grid lines.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
griddash
¶Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”).
[‘solid’, ‘dot’, ‘dash’, ‘longdash’, ‘dashdot’, ‘longdashdot’]
(e.g. ‘5px 10px 2px 2px’, ‘5, 10, 2, 2’, ‘10% 20% 40%’, etc.)
gridwidth
¶Sets the width (in px) of the grid lines.
An int or float in the interval [0, inf]
int|float
hoverformat
¶Sets the hover text formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”
A string
A number that will be converted to a string
labelalias
¶Replacement text for specific tick or hover labels. For example using {US: ‘USA’, CA: ‘Canada’} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html- like tags or MathJax.
The ‘labelalias’ property accepts values of any type
Any
layer
¶Sets the layer on which this axis is displayed. If above
traces, this axis is displayed above all the subplot’s traces
If below traces, this axis is displayed below all the
subplot’s traces, but above the grid lines. Useful when used
together with scatter-like traces with cliponaxis
set to
False to show markers and/or text nodes above this axis.
[‘above traces’, ‘below traces’]
Any
linecolor
¶Sets the axis line color.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
linewidth
¶Sets the width (in px) of the axis line.
An int or float in the interval [0, inf]
int|float
minexponent
¶Hide SI prefix for 10^n if |n| is below this number. This only
has an effect when tickformat
is “SI” or “B”.
An int or float in the interval [0, inf]
int|float
nticks
¶Specifies the maximum number of ticks for the particular axis.
The actual number of ticks will be chosen automatically to be
less than or equal to nticks
. Has an effect only if
tickmode
is set to “auto”.
An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]
period
¶Set the angular period. Has an effect only when
angularaxis.type
is “category”.
An int or float in the interval [0, inf]
int|float
rotation
¶Sets that start position (in degrees) of the angular axis By
default, polar subplots with direction
set to
“counterclockwise” get a rotation
of 0 which corresponds to
due East (like what mathematicians prefer). In turn, polar with
direction
set to “clockwise” get a rotation of 90 which
corresponds to due North (like on a compass),
The ‘rotation’ property is a angle (in degrees) that may be specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).
int|float
separatethousands
¶If “true”, even 4-digit integers are separated
The ‘separatethousands’ property must be specified as a bool (either True, or False)
showexponent
¶If “all”, all exponents are shown besides their significands. If “first”, only the exponent of the first tick is shown. If “last”, only the exponent of the last tick is shown. If “none”, no exponents appear.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
showgrid
¶Determines whether or not grid lines are drawn. If True, the grid lines are drawn at every tick mark.
The ‘showgrid’ property must be specified as a bool (either True, or False)
showline
¶Determines whether or not a line bounding this axis is drawn.
The ‘showline’ property must be specified as a bool (either True, or False)
showticklabels
¶Determines whether or not the tick labels are drawn.
The ‘showticklabels’ property must be specified as a bool (either True, or False)
showtickprefix
¶If “all”, all tick labels are displayed with a prefix. If “first”, only the first tick is displayed with a prefix. If “last”, only the last tick is displayed with a suffix. If “none”, tick prefixes are hidden.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
showticksuffix
¶Same as showtickprefix
but for tick suffixes.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
thetaunit
¶Sets the format unit of the formatted “theta” values. Has an
effect only when angularaxis.type
is “linear”.
[‘radians’, ‘degrees’]
Any
tick0
¶Sets the placement of the first tick on this axis. Use with
dtick
. If the axis type
is “log”, then you must take the
log of your starting tick (e.g. to set the starting tick to
100, set the tick0
to 2) except when dtick`=*L<f>* (see
`dtick
for more info). If the axis type
is “date”, it should
be a date string, like date data. If the axis type
is
“category”, it should be a number, using the scale where each
category is assigned a serial number from zero in the order it
appears.
The ‘tick0’ property accepts values of any type
Any
tickangle
¶Sets the angle of the tick labels with respect to the
horizontal. For example, a tickangle
of -90 draws the tick
labels vertically.
The ‘tickangle’ property is a angle (in degrees) that may be specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).
int|float
tickcolor
¶Sets the tick color.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
tickfont
¶Sets the tick font.
The ‘tickfont’ property is an instance of Tickfont that may be specified as:
An instance of
plotly.graph_objects.layout.polar.angularaxis.Tickfont
A dict of string/value properties that will be passed to the Tickfont constructor
Supported dict properties:
color
- family
HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.
- lineposition
Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.
- shadow
Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en- US/docs/Web/CSS/text-shadow for additional options.
size
- style
Sets whether a font should be styled with a normal or italic face from its family.
- textcase
Sets capitalization of text. It can be used to make text appear in all-uppercase or all- lowercase, or with each word capitalized.
- variant
Sets the variant of the font.
- weight
Sets the weight (or boldness) of the font.
tickformat
¶Sets the tick label formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”
A string
A number that will be converted to a string
tickformatstopdefaults
¶When used in a template (as layout.template.layout.polar.angula raxis.tickformatstopdefaults), sets the default property values to use for elements of layout.polar.angularaxis.tickformatstops
The ‘tickformatstopdefaults’ property is an instance of Tickformatstop that may be specified as:
An instance of
plotly.graph_objects.layout.polar.angularaxis.Tickformatstop
A dict of string/value properties that will be passed to the Tickformatstop constructor
Supported dict properties:
plotly.graph_objects.layout.polar.angularaxis.Tickformatstop
tickformatstops
¶The ‘tickformatstops’ property is a tuple of instances of Tickformatstop that may be specified as:
A list or tuple of instances of plotly.graph_objects.layout.polar.angularaxis.Tickformatstop
A list or tuple of dicts of string/value properties that will be passed to the Tickformatstop constructor
Supported dict properties:
- dtickrange
range [min, max], where “min”, “max” - dtick values which describe some zoom level, it is possible to omit “min” or “max” value by passing “null”
- enabled
Determines whether or not this stop is used. If
false
, this stop is ignored even within itsdtickrange
.- name
When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with
templateitemname
matching thisname
alongside your modifications (includingvisible: false
orenabled: false
to hide it). Has no effect outside of a template.- templateitemname
Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with
templateitemname
matching itsname
, alongside your modifications (includingvisible: false
orenabled: false
to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it withvisible: true
.- value
string - dtickformat for described zoom level, the same as “tickformat”
tuple[plotly.graph_objects.layout.polar.angularaxis.Tickformatstop]
ticklabelstep
¶Sets the spacing between tick labels as compared to the spacing
between ticks. A value of 1 (default) means each tick gets a
label. A value of 2 means shows every 2nd label. A larger value
n means only every nth tick is labeled. tick0
determines
which labels are shown. Not implemented for axes with type
“log” or “multicategory”, or when tickmode
is “array”.
An int (or float that will be cast to an int) in the interval [1, 9223372036854775807]
ticklen
¶Sets the tick length (in px).
An int or float in the interval [0, inf]
int|float
tickmode
¶Sets the tick mode for this axis. If “auto”, the number of
ticks is set via nticks
. If “linear”, the placement of the
ticks is determined by a starting position tick0
and a tick
step dtick
(“linear” is the default value if tick0
and
dtick
are provided). If “array”, the placement of the ticks
is set via tickvals
and the tick text is ticktext
. (“array”
is the default value if tickvals
is provided).
[‘auto’, ‘linear’, ‘array’]
Any
tickprefix
¶Sets a tick label prefix.
A string
A number that will be converted to a string
ticks
¶Determines whether ticks are drawn or not. If “”, this axis’ ticks are not drawn. If “outside” (“inside”), this axis’ are drawn outside (inside) the axis lines.
[‘outside’, ‘inside’, ‘’]
Any
ticksuffix
¶Sets a tick label suffix.
A string
A number that will be converted to a string
ticktext
¶Sets the text displayed at the ticks position via tickvals
.
Only has an effect if tickmode
is set to “array”. Used with
tickvals
.
The ‘ticktext’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
ticktextsrc
¶Sets the source reference on Chart Studio Cloud for ticktext
.
The ‘ticktextsrc’ property must be specified as a string or as a plotly.grid_objs.Column object
tickvals
¶Sets the values at which ticks on this axis appear. Only has an
effect if tickmode
is set to “array”. Used with ticktext
.
The ‘tickvals’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
tickvalssrc
¶Sets the source reference on Chart Studio Cloud for tickvals
.
The ‘tickvalssrc’ property must be specified as a string or as a plotly.grid_objs.Column object
tickwidth
¶Sets the tick width (in px).
An int or float in the interval [0, inf]
int|float
type
¶Sets the angular axis type. If “linear”, set thetaunit
to
determine the unit in which axis value are shown. If *category,
use period
to set the number of integer coordinates around
polar axis.
[‘-‘, ‘linear’, ‘category’]
Any
uirevision
¶Controls persistence of user-driven changes in axis rotation
.
Defaults to polar<N>.uirevision
.
The ‘uirevision’ property accepts values of any type
Any
plotly.graph_objects.layout.polar.
Domain
(arg=None, column=None, row=None, x=None, y=None, **kwargs)¶Bases: plotly.basedatatypes.BaseLayoutHierarchyType
column
¶If there is a layout grid, use the domain for this column in the grid for this polar subplot .
An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]
row
¶If there is a layout grid, use the domain for this row in the grid for this polar subplot .
An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]
x
¶fraction).
The ‘x’ property is an info array that may be specified as:
a list or tuple of 2 elements where:
An int or float in the interval [0, 1]
An int or float in the interval [0, 1]
list
y
¶fraction).
The ‘y’ property is an info array that may be specified as:
a list or tuple of 2 elements where:
An int or float in the interval [0, 1]
An int or float in the interval [0, 1]
list
plotly.graph_objects.layout.polar.
RadialAxis
(arg=None, angle=None, autorange=None, autorangeoptions=None, autotickangles=None, autotypenumbers=None, calendar=None, categoryarray=None, categoryarraysrc=None, categoryorder=None, color=None, dtick=None, exponentformat=None, gridcolor=None, griddash=None, gridwidth=None, hoverformat=None, labelalias=None, layer=None, linecolor=None, linewidth=None, maxallowed=None, minallowed=None, minexponent=None, nticks=None, range=None, rangemode=None, separatethousands=None, showexponent=None, showgrid=None, showline=None, showticklabels=None, showtickprefix=None, showticksuffix=None, side=None, tick0=None, tickangle=None, tickcolor=None, tickfont=None, tickformat=None, tickformatstops=None, tickformatstopdefaults=None, ticklabelstep=None, ticklen=None, tickmode=None, tickprefix=None, ticks=None, ticksuffix=None, ticktext=None, ticktextsrc=None, tickvals=None, tickvalssrc=None, tickwidth=None, title=None, type=None, uirevision=None, visible=None, **kwargs)¶Bases: plotly.basedatatypes.BaseLayoutHierarchyType
angle
¶Sets the angle (in degrees) from which the radial axis is
drawn. Note that by default, radial axis line on the theta=0
line corresponds to a line pointing right (like what
mathematicians prefer). Defaults to the first polar.sector
angle.
The ‘angle’ property is a angle (in degrees) that may be specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).
int|float
autorange
¶Determines whether or not the range of this axis is computed in
relation to the input data. See rangemode
for more info. If
range
is provided and it has a value for both the lower and
upper bound, autorange
is set to False. Using “min” applies
autorange only to set the minimum. Using “max” applies
autorange only to set the maximum. Using min reversed applies
autorange only to set the minimum on a reversed axis. Using
max reversed applies autorange only to set the maximum on a
reversed axis. Using “reversed” applies autorange on both ends
and reverses the axis direction.
[True, False, ‘reversed’, ‘min reversed’, ‘max reversed’, ‘min’, ‘max’]
Any
autorangeoptions
¶The ‘autorangeoptions’ property is an instance of Autorangeoptions that may be specified as:
An instance of
plotly.graph_objects.layout.polar.radialaxis.Autorangeoptions
A dict of string/value properties that will be passed to the Autorangeoptions constructor
Supported dict properties:
- clipmax
Clip autorange maximum if it goes beyond this value. Has no effect when
autorangeoptions.maxallowed
is provided.- clipmin
Clip autorange minimum if it goes beyond this value. Has no effect when
autorangeoptions.minallowed
is provided.- include
Ensure this value is included in autorange.
- includesrc
Sets the source reference on Chart Studio Cloud for
include
.- maxallowed
Use this value exactly as autorange maximum.
- minallowed
Use this value exactly as autorange minimum.
plotly.graph_objects.layout.polar.radialaxis.Autorangeoptions
autotickangles
¶When tickangle
is set to “auto”, it will be set to the first
angle in this array that is large enough to prevent label
overlap.
The ‘autotickangles’ property is an info array that may be specified as: * a list of elements where:
The ‘autotickangles[i]’ property is a angle (in degrees) that may be
specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).
autotypenumbers
¶Using “strict” a numeric string in trace data is not converted
to a number. Using convert types a numeric string in trace
data may be treated as a number during automatic axis type
detection. Defaults to layout.autotypenumbers.
[‘convert types’, ‘strict’]
Any
calendar
¶Sets the calendar system to use for range
and tick0
if this
is a date axis. This does not set the calendar for interpreting
data on this axis, that’s specified in the trace or via the
global layout.calendar
[‘chinese’, ‘coptic’, ‘discworld’, ‘ethiopian’, ‘gregorian’, ‘hebrew’, ‘islamic’, ‘jalali’, ‘julian’, ‘mayan’, ‘nanakshahi’, ‘nepali’, ‘persian’, ‘taiwan’, ‘thai’, ‘ummalqura’]
Any
categoryarray
¶Sets the order in which categories on this axis appear. Only
has an effect if categoryorder
is set to “array”. Used with
categoryorder
.
The ‘categoryarray’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
categoryarraysrc
¶Sets the source reference on Chart Studio Cloud for
categoryarray
.
The ‘categoryarraysrc’ property must be specified as a string or as a plotly.grid_objs.Column object
categoryorder
¶Specifies the ordering logic for the case of categorical
variables. By default, plotly uses “trace”, which specifies the
order that is present in the data supplied. Set categoryorder
to category ascending or category descending if order
should be determined by the alphanumerical order of the
category names. Set categoryorder
to “array” to derive the
ordering from the attribute categoryarray
. If a category is
not found in the categoryarray
array, the sorting behavior
for that attribute will be identical to the “trace” mode. The
unspecified categories will follow the categories in
categoryarray
. Set categoryorder
to total ascending or
total descending if order should be determined by the
numerical order of the values. Similarly, the order can be
determined by the min, max, sum, mean, geometric mean or median
of all the values.
[‘trace’, ‘category ascending’, ‘category descending’, ‘array’, ‘total ascending’, ‘total descending’, ‘min ascending’, ‘min descending’, ‘max ascending’, ‘max descending’, ‘sum ascending’, ‘sum descending’, ‘mean ascending’, ‘mean descending’, ‘geometric mean ascending’, ‘geometric mean descending’, ‘median ascending’, ‘median descending’]
Any
color
¶Sets default for all colors associated with this axis all at once: line, font, tick, and grid colors. Grid color is lightened by blending this with the plot background Individual pieces can override this.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
dtick
¶Sets the step in-between ticks on this axis. Use with tick0
.
Must be a positive number, or special strings available to
“log” and “date” axes. If the axis type
is “log”, then ticks
are set every 10^(n*dtick) where n is the tick number. For
example, to set a tick mark at 1, 10, 100, 1000, … set dtick
to 1. To set tick marks at 1, 100, 10000, … set dtick to 2.
To set tick marks at 1, 5, 25, 125, 625, 3125, … set dtick to
log_10(5), or 0.69897000433. “log” has several special values;
“L<f>”, where f
is a positive number, gives ticks linearly
spaced in value (but not position). For example tick0
= 0.1,
dtick
= “L0.5” will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To
show powers of 10 plus small digits between, use “D1” (all
digits) or “D2” (only 2 and 5). tick0
is ignored for “D1” and
“D2”. If the axis type
is “date”, then you must convert the
time to milliseconds. For example, to set the interval between
ticks to one day, set dtick
to 86400000.0. “date” also has
special values “M<n>” gives ticks spaced by a number of months.
n
must be a positive integer. To set ticks on the 15th of
every third month, set tick0
to “2000-01-15” and dtick
to
“M3”. To set ticks every 4 years, set dtick
to “M48”
The ‘dtick’ property accepts values of any type
Any
exponentformat
¶Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If “none”, it appears as 1,000,000,000. If “e”, 1e+9. If “E”, 1E+9. If “power”, 1x10^9 (with 9 in a super script). If “SI”, 1G. If “B”, 1B.
[‘none’, ‘e’, ‘E’, ‘power’, ‘SI’, ‘B’]
Any
gridcolor
¶Sets the color of the grid lines.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
griddash
¶Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”).
[‘solid’, ‘dot’, ‘dash’, ‘longdash’, ‘dashdot’, ‘longdashdot’]
(e.g. ‘5px 10px 2px 2px’, ‘5, 10, 2, 2’, ‘10% 20% 40%’, etc.)
gridwidth
¶Sets the width (in px) of the grid lines.
An int or float in the interval [0, inf]
int|float
hoverformat
¶Sets the hover text formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”
A string
A number that will be converted to a string
labelalias
¶Replacement text for specific tick or hover labels. For example using {US: ‘USA’, CA: ‘Canada’} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html- like tags or MathJax.
The ‘labelalias’ property accepts values of any type
Any
layer
¶Sets the layer on which this axis is displayed. If above
traces, this axis is displayed above all the subplot’s traces
If below traces, this axis is displayed below all the
subplot’s traces, but above the grid lines. Useful when used
together with scatter-like traces with cliponaxis
set to
False to show markers and/or text nodes above this axis.
[‘above traces’, ‘below traces’]
Any
linecolor
¶Sets the axis line color.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
linewidth
¶Sets the width (in px) of the axis line.
An int or float in the interval [0, inf]
int|float
maxallowed
¶Determines the maximum range of this axis.
The ‘maxallowed’ property accepts values of any type
Any
minallowed
¶Determines the minimum range of this axis.
The ‘minallowed’ property accepts values of any type
Any
minexponent
¶Hide SI prefix for 10^n if |n| is below this number. This only
has an effect when tickformat
is “SI” or “B”.
An int or float in the interval [0, inf]
int|float
nticks
¶Specifies the maximum number of ticks for the particular axis.
The actual number of ticks will be chosen automatically to be
less than or equal to nticks
. Has an effect only if
tickmode
is set to “auto”.
An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]
range
¶type
is “log”, thenyou must take the log of your desired range (e.g. to set the
range from 1 to 100, set the range from 0 to 2). If the axis
type
is “date”, it should be date strings, like date data,
though Date objects and unix milliseconds will be accepted and
converted to strings. If the axis type
is “category”, it
should be numbers, using the scale where each category is
assigned a serial number from zero in the order it appears.
Leaving either or both elements null
impacts the default
autorange
.
The ‘range’ property is an info array that may be specified as:
a list or tuple of 2 elements where:
The ‘range[0]’ property accepts values of any type
The ‘range[1]’ property accepts values of any type
list
rangemode
¶If *tozero*`, the range extends to 0, regardless of the input data If “nonnegative”, the range is non-negative, regardless of the input data. If “normal”, the range is computed in relation to the extrema of the input data (same behavior as for cartesian axes).
[‘tozero’, ‘nonnegative’, ‘normal’]
Any
separatethousands
¶If “true”, even 4-digit integers are separated
The ‘separatethousands’ property must be specified as a bool (either True, or False)
showexponent
¶If “all”, all exponents are shown besides their significands. If “first”, only the exponent of the first tick is shown. If “last”, only the exponent of the last tick is shown. If “none”, no exponents appear.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
showgrid
¶Determines whether or not grid lines are drawn. If True, the grid lines are drawn at every tick mark.
The ‘showgrid’ property must be specified as a bool (either True, or False)
showline
¶Determines whether or not a line bounding this axis is drawn.
The ‘showline’ property must be specified as a bool (either True, or False)
showticklabels
¶Determines whether or not the tick labels are drawn.
The ‘showticklabels’ property must be specified as a bool (either True, or False)
showtickprefix
¶If “all”, all tick labels are displayed with a prefix. If “first”, only the first tick is displayed with a prefix. If “last”, only the last tick is displayed with a suffix. If “none”, tick prefixes are hidden.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
showticksuffix
¶Same as showtickprefix
but for tick suffixes.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
side
¶Determines on which side of radial axis line the tick and tick labels appear.
[‘clockwise’, ‘counterclockwise’]
Any
tick0
¶Sets the placement of the first tick on this axis. Use with
dtick
. If the axis type
is “log”, then you must take the
log of your starting tick (e.g. to set the starting tick to
100, set the tick0
to 2) except when dtick`=*L<f>* (see
`dtick
for more info). If the axis type
is “date”, it should
be a date string, like date data. If the axis type
is
“category”, it should be a number, using the scale where each
category is assigned a serial number from zero in the order it
appears.
The ‘tick0’ property accepts values of any type
Any
tickangle
¶Sets the angle of the tick labels with respect to the
horizontal. For example, a tickangle
of -90 draws the tick
labels vertically.
The ‘tickangle’ property is a angle (in degrees) that may be specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).
int|float
tickcolor
¶Sets the tick color.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
tickfont
¶Sets the tick font.
The ‘tickfont’ property is an instance of Tickfont that may be specified as:
An instance of
plotly.graph_objects.layout.polar.radialaxis.Tickfont
A dict of string/value properties that will be passed to the Tickfont constructor
Supported dict properties:
color
- family
HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.
- lineposition
Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.
- shadow
Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en- US/docs/Web/CSS/text-shadow for additional options.
size
- style
Sets whether a font should be styled with a normal or italic face from its family.
- textcase
Sets capitalization of text. It can be used to make text appear in all-uppercase or all- lowercase, or with each word capitalized.
- variant
Sets the variant of the font.
- weight
Sets the weight (or boldness) of the font.
tickformat
¶Sets the tick label formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”
A string
A number that will be converted to a string
tickformatstopdefaults
¶When used in a template (as layout.template.layout.polar.radial axis.tickformatstopdefaults), sets the default property values to use for elements of layout.polar.radialaxis.tickformatstops
The ‘tickformatstopdefaults’ property is an instance of Tickformatstop that may be specified as:
An instance of
plotly.graph_objects.layout.polar.radialaxis.Tickformatstop
A dict of string/value properties that will be passed to the Tickformatstop constructor
Supported dict properties:
tickformatstops
¶The ‘tickformatstops’ property is a tuple of instances of Tickformatstop that may be specified as:
A list or tuple of instances of plotly.graph_objects.layout.polar.radialaxis.Tickformatstop
A list or tuple of dicts of string/value properties that will be passed to the Tickformatstop constructor
Supported dict properties:
- dtickrange
range [min, max], where “min”, “max” - dtick values which describe some zoom level, it is possible to omit “min” or “max” value by passing “null”
- enabled
Determines whether or not this stop is used. If
false
, this stop is ignored even within itsdtickrange
.- name
When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with
templateitemname
matching thisname
alongside your modifications (includingvisible: false
orenabled: false
to hide it). Has no effect outside of a template.- templateitemname
Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with
templateitemname
matching itsname
, alongside your modifications (includingvisible: false
orenabled: false
to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it withvisible: true
.- value
string - dtickformat for described zoom level, the same as “tickformat”
tuple[plotly.graph_objects.layout.polar.radialaxis.Tickformatstop]
ticklabelstep
¶Sets the spacing between tick labels as compared to the spacing
between ticks. A value of 1 (default) means each tick gets a
label. A value of 2 means shows every 2nd label. A larger value
n means only every nth tick is labeled. tick0
determines
which labels are shown. Not implemented for axes with type
“log” or “multicategory”, or when tickmode
is “array”.
An int (or float that will be cast to an int) in the interval [1, 9223372036854775807]
ticklen
¶Sets the tick length (in px).
An int or float in the interval [0, inf]
int|float
tickmode
¶Sets the tick mode for this axis. If “auto”, the number of
ticks is set via nticks
. If “linear”, the placement of the
ticks is determined by a starting position tick0
and a tick
step dtick
(“linear” is the default value if tick0
and
dtick
are provided). If “array”, the placement of the ticks
is set via tickvals
and the tick text is ticktext
. (“array”
is the default value if tickvals
is provided).
[‘auto’, ‘linear’, ‘array’]
Any
tickprefix
¶Sets a tick label prefix.
A string
A number that will be converted to a string
ticks
¶Determines whether ticks are drawn or not. If “”, this axis’ ticks are not drawn. If “outside” (“inside”), this axis’ are drawn outside (inside) the axis lines.
[‘outside’, ‘inside’, ‘’]
Any
ticksuffix
¶Sets a tick label suffix.
A string
A number that will be converted to a string
ticktext
¶Sets the text displayed at the ticks position via tickvals
.
Only has an effect if tickmode
is set to “array”. Used with
tickvals
.
The ‘ticktext’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
ticktextsrc
¶Sets the source reference on Chart Studio Cloud for ticktext
.
The ‘ticktextsrc’ property must be specified as a string or as a plotly.grid_objs.Column object
tickvals
¶Sets the values at which ticks on this axis appear. Only has an
effect if tickmode
is set to “array”. Used with ticktext
.
The ‘tickvals’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
tickvalssrc
¶Sets the source reference on Chart Studio Cloud for tickvals
.
The ‘tickvalssrc’ property must be specified as a string or as a plotly.grid_objs.Column object
tickwidth
¶Sets the tick width (in px).
An int or float in the interval [0, inf]
int|float
title
¶The ‘title’ property is an instance of Title that may be specified as:
An instance of
plotly.graph_objects.layout.polar.radialaxis.Title
A dict of string/value properties that will be passed to the Title constructor
Supported dict properties:
- font
Sets this axis’ title font.
- text
Sets the title of this axis.
type
¶Sets the axis type. By default, plotly attempts to determined the axis type by looking into the data of the traces that referenced the axis in question.
[‘-‘, ‘linear’, ‘log’, ‘date’, ‘category’]
Any
uirevision
¶Controls persistence of user-driven changes in axis range
,
autorange
, angle
, and title
if in editable: true
configuration. Defaults to polar<N>.uirevision
.
The ‘uirevision’ property accepts values of any type
Any