@@ -157,7 +157,7 @@ i2c_err_t i2cWrite(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * dat
157157
158158 if (i2c -> dev -> status_reg .bus_busy == 1 )
159159 {
160- //log_w ( "Busy Timeout! Addr: %x", address >> 1 );
160+ log_e ( "Busy Timeout! Addr: %x" , address >> 1 );
161161 I2C_MUTEX_UNLOCK ();
162162 return I2C_ERROR_BUSY ;
163163 }
@@ -207,28 +207,28 @@ i2c_err_t i2cWrite(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * dat
207207 while (1 ) {
208208 //have been looping for too long
209209 if ((millis () - startAt )> 50 ){
210- // log_e("Timeout! Addr: %x", address >> 1);
210+ log_e ("Timeout! Addr: %x" , address >> 1 );
211211 I2C_MUTEX_UNLOCK ();
212212 return I2C_ERROR_BUS ;
213213 }
214214
215215 //Bus failed (maybe check for this while waiting?
216216 if (i2c -> dev -> int_raw .arbitration_lost ) {
217- // log_e("Bus Fail! Addr: %x", address >> 1);
217+ log_e ("Bus Fail! Addr: %x" , address >> 1 );
218218 I2C_MUTEX_UNLOCK ();
219219 return I2C_ERROR_BUS ;
220220 }
221221
222222 //Bus timeout
223223 if (i2c -> dev -> int_raw .time_out ) {
224- // log_e("Bus Timeout! Addr: %x", address >> 1);
224+ log_e ("Bus Timeout! Addr: %x" , address >> 1 );
225225 I2C_MUTEX_UNLOCK ();
226226 return I2C_ERROR_TIMEOUT ;
227227 }
228228
229229 //Transmission did not finish and ACK_ERR is set
230230 if (i2c -> dev -> int_raw .ack_err ) {
231- // log_w("Ack Error! Addr: %x", address >> 1);
231+ log_w ("Ack Error! Addr: %x" , address >> 1 );
232232 while ((i2c -> dev -> status_reg .bus_busy ) && ((millis () - startAt )> 50 ));
233233 I2C_MUTEX_UNLOCK ();
234234 return I2C_ERROR_ACK ;
@@ -260,7 +260,7 @@ i2c_err_t i2cRead(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data
260260
261261 if (i2c -> dev -> status_reg .bus_busy == 1 )
262262 {
263- // log_w( "Busy Timeout! Addr: %x", address >> 1 );
263+ log_w ( "Busy Timeout! Addr: %x" , address >> 1 );
264264 I2C_MUTEX_UNLOCK ();
265265 return I2C_ERROR_BUSY ;
266266 }
@@ -310,28 +310,28 @@ i2c_err_t i2cRead(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data
310310 while (1 ) {
311311 //have been looping for too long
312312 if ((millis () - startAt )> 50 ){
313- // log_e("Timeout! Addr: %x", address >> 1);
313+ log_e ("Timeout! Addr: %x" , address >> 1 );
314314 I2C_MUTEX_UNLOCK ();
315315 return I2C_ERROR_BUS ;
316316 }
317317
318318 //Bus failed (maybe check for this while waiting?
319319 if (i2c -> dev -> int_raw .arbitration_lost ) {
320- // log_e("Bus Fail! Addr: %x", address >> 1);
320+ log_e ("Bus Fail! Addr: %x" , address >> 1 );
321321 I2C_MUTEX_UNLOCK ();
322322 return I2C_ERROR_BUS ;
323323 }
324324
325325 //Bus timeout
326326 if (i2c -> dev -> int_raw .time_out ) {
327- // log_e("Bus Timeout! Addr: %x", address >> 1);
327+ log_e ("Bus Timeout! Addr: %x" , address >> 1 );
328328 I2C_MUTEX_UNLOCK ();
329329 return I2C_ERROR_TIMEOUT ;
330330 }
331331
332332 //Transmission did not finish and ACK_ERR is set
333333 if (i2c -> dev -> int_raw .ack_err ) {
334- // log_w("Ack Error! Addr: %x", address >> 1);
334+ log_w ("Ack Error! Addr: %x" , address >> 1 );
335335 I2C_MUTEX_UNLOCK ();
336336 return I2C_ERROR_ACK ;
337337 }
@@ -462,7 +462,7 @@ void i2cInitFix(i2c_t * i2c){
462462 i2cSetCmd (i2c , 2 , I2C_CMD_STOP , 0 , false, false, false);
463463 if (i2c -> dev -> status_reg .bus_busy ) // If this condition is true, the while loop will timeout as done will not be set
464464 {
465- // log_e("Busy at initialization!");
465+ log_e ("Busy at initialization!" );
466466 }
467467 i2c -> dev -> ctr .trans_start = 1 ;
468468 uint16_t count = 50000 ;
0 commit comments