This repository contains the embedded driver sources for Sensirion's SGP product line.

Download the latest ready-to-use driver bundle from the releases page

We strongly recommend to use the driver from the release bundle instead of cloning the repository.

Note: If you use the SVM40 module (which contains an SGP40) please check out https://github.com/Sensirion/embedded-svm40.

Note: If you are using SGP40 or SGP41 sensor, please check out the following repositories:

• https://github.com/Sensirion/embedded-i2c-sgp40
• https://github.com/Sensirion/embedded-i2c-sgp41

git clone --recursive https://github.com/Sensirion/embedded-sgp.git

• embedded-common - Submodule repository for common embedded driver stuff
• embedded-sht - Submodule repository for SHT drivers
• sgp40 - SPG40 driver
• sgp40_voc_index - Driver for a SGP40 and SHTC3 combo with a VOC algorithm.
• sgp30 - SGP30 driver
• sgpc3 - SGPC3 driver
• svm30 - Driver for the SVM30 module consisting of a SPG30 and an SHTC3 sensor.
• sgpc3_with_shtc1 - Driver for a SGPC3 and SHTC1 sensor combo.
• sgp-common - Common code for all SGP drivers.

make release

This will create a release folder with the necessary driver files in it, including a Makefile. That way, you have just ONE folder with all the sources ready to build your driver for your platform.

You only need to touch the following files:

• sensirion_arch_config.h (architecture specifics, you need to specify the integer sizes)

and depending on your i2c implementation one of the following:

• sensirion_hw_i2c_implementation.c (functions for hardware i2c communication if your platform supports that)
• sensirion_sw_i2c_implementation.c (functions for software i2c communication via GPIOs)

1. Step into your desired directory (e.g.: release/sgp30)
2. Adjust sensirion_arch_config.h if you don't have the <stdint.h> header file available
3. Implement necessary functions in one of the *_implementation.c files
4. make

Please check the embedded-common repository for further information and sample implementations.