Acetone cyanohydrin
 | ||
| ||
| Names | ||
|---|---|---|
| Preferred IUPAC name
2-Hydroxy-2-methylpropanenitrile[1] | ||
| Other names | ||
| Identifiers | ||
3D model (JSmol) |
||
| 605391 | ||
| ChEBI | ||
| ChemSpider | ||
| DrugBank | ||
| ECHA InfoCard | 100.000.828 | |
| EC Number |
| |
| KEGG | ||
| MeSH | acetone+cyanohydrin | |
PubChem CID |
||
| RTECS number |
| |
| UNII | ||
| UN number | 1541 | |
CompTox Dashboard (EPA) |
||
| ||
| ||
| Properties | ||
| C4H7NO | ||
| Molar mass | 85.106 g·mol−1 | |
| Appearance | Colourless liquid | |
| Density | 932 mg·mL−1 | |
| Melting point | −21.2 °C; −6.3 °F; 251.9 K | |
| Boiling point | 95 °C; 203 °F; 368 K | |
| Vapor pressure | 2 kPa (at 20 °C) | |
Refractive index (nD) |
1.399 | |
| Thermochemistry | ||
Std enthalpy of formation (ΔfH⦵298) |
−121.7 to −120.1 kJ·mol−1 | |
Std enthalpy of combustion (ΔcH⦵298) |
−2.4514 to −2.4498 MJ·mol−1 | |
| Hazards | ||
| GHS labelling: | ||
  | ||
| Danger | ||
| H300, H310, H330, H410 | ||
| P260, P273, P280, P284, P301+P310 | ||
| NFPA 704 (fire diamond) | ||
| Flash point | 75 °C (167 °F; 348 K) | |
| Explosive limits | 2.25–11% | |
| Lethal dose or concentration (LD, LC): | ||
LD50 (median dose) |
| |
| NIOSH (US health exposure limits): | ||
PEL (Permissible) |
None[2] | |
REL (Recommended) |
C 1 ppm (4 mg·m−3) [15-minute][2] | |
IDLH (Immediate danger) |
N.D.[2] | |
| Safety data sheet (SDS) | fishersci.com | |
| Related compounds | ||
Related alkanenitriles |
||
Related compounds |
DBNPA | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Acetone cyanohydrin (ACH) is an organic compound with the formula (CH3)2C(OH)CN. It is a colorless liquid used in the production of methyl methacrylate, the monomer of the transparent plastic polymethyl methacrylate (PMMA), also known as acrylic. It liberates hydrogen cyanide easily, so it is used as a source of such. For this reason, this cyanohydrin is also highly toxic.[3]
Preparation
[edit]In the laboratory, this compound may be prepared by treating sodium cyanide with acetone, followed by acidification:[4]
Considering the high human toxicity of this process, a lab scale production has been developed using a microreactor-scale flow chemistry system[5] to avoid needing to manufacture and store large quantities of the reagent. Alternatively, a simplified procedure involves the action of sodium or potassium cyanide on the sodium bisulfite adduct of acetone prepared in situ. This gives a less pure product, one that is nonetheless suitable for most syntheses.[6]
Reactions
[edit]Acetone cyanohydrin is an intermediate en route to methyl methacrylate.[7] Treatment with sulfuric acid gives the sulfate ester of the methacrylamide,[clarification needed] methanolysis of which gives ammonium bisulfate and methyl methacrylate.[8]
It is used as a surrogate in place of HCN, as illustrated by its use as a precursor to lithium cyanide:[9]
- (CH3)2C(OH)CN + LiH → (CH3)2CO + LiCN + H2
In transhydrocyanation, an equivalent of HCN is transferred from acetone cyanohydrin to another acceptor, with acetone as byproduct. The transfer is an equilibrium process, initiated by base. The reaction can be driven by trapping reactions or by the use of a superior HCN acceptor, such as an aldehyde.[3] In the hydrocyanation reaction of butadiene, the transfer is irreversible.[10]
Natural occurrence in cassava
[edit]Cassava tubers contain linamarin, a glucoside of this compound, alongside the enzyme linamarase which splits the precursor compound linamarin into acetone cyanohydrin and dextrose when the plant is mechanically damaged.
This can pose a risk to human health.[11]
Safety
[edit]Acetone cyanohydrin is classified as an extremely hazardous substance in the US Emergency Planning and Community Right-to-Know Act and carries an RCRA P069 waste code. The principal hazards of acetone cyanohydrin arise from rapid decomposition on contact with water, which releases highly toxic hydrogen cyanide vapors.
References
[edit]- ↑ "acetone cyanohydrin - Compound Summary". PubChem Compound. USA: National Center for Biotechnology Information. 16 September 2004. Identification. Retrieved 8 June 2012.
- 1 2 3 4 5 6 NIOSH Pocket Guide to Chemical Hazards. "#0005". National Institute for Occupational Safety and Health (NIOSH).
- 1 2 Haroutounian, Serkos A. (2001). "Acetone Cyanohydrin". Encyclopedia of Reagents for Organic Synthesis. eEROS. doi:10.1002/047084289X.ra014. ISBN 0471936235.
- ↑ Cox, R. F. B.; Stormont, R. T. (1935). "Acetone Cyanohydrin". Organic Syntheses. 15: 1. doi:10.15227/orgsyn.015.0001; Collected Volumes, vol. 2.
- ↑ Heugebaert, Thomas S. A.; Roman, Bart I.; De Blieck, Ann; Stevens, Christian V. (2010-08-11). "A safe production method for acetone cyanohydrin". Tetrahedron Letters. 51 (32): 4189–4191. doi:10.1016/j.tetlet.2010.06.004.
- ↑ Wagner, E. C.; Baizer, Manuel. "5,5-Dimethylhydantoin". Organic Syntheses; Collected Volumes, vol. 3, p. 323.
- ↑ Wiley, Richard H.; Waddey, Walter E. (1949). "Methacrylamide". Organic Syntheses. 29: 61. doi:10.15227/orgsyn.029.0061.
- ↑ Bauer, William Jr. "Methacrylic Acid and Derivatives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a16_441. ISBN 3-527-30673-0..
- ↑ Tom Livinghouse (1981). "Trimethylsilyl Cyanide: Cyanosilylation of p-Benzoquinone". Org. Synth. 60: 126. doi:10.15227/orgsyn.060.0126.
- ↑ Bini, L.; Müller, C.; Wilting, J.; von Chrzanowski, L.; Spek, A. L.; Vogt, D. (October 2007). "Highly selective hydrocyanation of butadiene toward 3-pentenenitrile". J. Am. Chem. Soc. 129 (42): 12622–12623. Bibcode:2007JAChS.12912622B. doi:10.1021/ja074922e. hdl:1874/26892. PMID 17902667.
- ↑ Banea, J. P.; Nahimana, G.; Mandombi, C.; Bradbury, J. Howard; Denton, Ian C.; Kuwa, N. (2012). "Control of konzo in DRC using the wetting method on cassava flour". Food and Chemical Toxicology: An International Journal Published for the British Industrial Biological Research Association. 50 (5): 1517–1523. doi:10.1016/j.fct.2012.02.001. ISSN 1873-6351. PMID 22342647.