| 1 | /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
| 2 | /* |
| 3 | * usbip.h |
| 4 | * |
| 5 | * USBIP uapi defines and function prototypes etc. |
| 6 | */ |
| 7 | |
| 8 | #ifndef _UAPI_LINUX_USBIP_H |
| 9 | #define _UAPI_LINUX_USBIP_H |
| 10 | |
| 11 | /* usbip device status - exported in usbip device sysfs status */ |
| 12 | enum usbip_device_status { |
| 13 | /* sdev is available. */ |
| 14 | SDEV_ST_AVAILABLE = 0x01, |
| 15 | /* sdev is now used. */ |
| 16 | SDEV_ST_USED, |
| 17 | /* sdev is unusable because of a fatal error. */ |
| 18 | SDEV_ST_ERROR, |
| 19 | |
| 20 | /* vdev does not connect a remote device. */ |
| 21 | VDEV_ST_NULL, |
| 22 | /* vdev is used, but the USB address is not assigned yet */ |
| 23 | VDEV_ST_NOTASSIGNED, |
| 24 | VDEV_ST_USED, |
| 25 | VDEV_ST_ERROR |
| 26 | }; |
| 27 | |
| 28 | /* USB URB Transfer flags: |
| 29 | * |
| 30 | * USBIP server and client (vchi) pack URBs in TCP packets. The following |
| 31 | * are the transfer type defines used in USBIP protocol. |
| 32 | */ |
| 33 | |
| 34 | #define USBIP_URB_SHORT_NOT_OK 0x0001 |
| 35 | #define USBIP_URB_ISO_ASAP 0x0002 |
| 36 | #define USBIP_URB_NO_TRANSFER_DMA_MAP 0x0004 |
| 37 | #define USBIP_URB_ZERO_PACKET 0x0040 |
| 38 | #define USBIP_URB_NO_INTERRUPT 0x0080 |
| 39 | #define USBIP_URB_FREE_BUFFER 0x0100 |
| 40 | #define USBIP_URB_DIR_IN 0x0200 |
| 41 | #define USBIP_URB_DIR_OUT 0 |
| 42 | #define USBIP_URB_DIR_MASK USBIP_URB_DIR_IN |
| 43 | |
| 44 | #define USBIP_URB_DMA_MAP_SINGLE 0x00010000 |
| 45 | #define USBIP_URB_DMA_MAP_PAGE 0x00020000 |
| 46 | #define USBIP_URB_DMA_MAP_SG 0x00040000 |
| 47 | #define USBIP_URB_MAP_LOCAL 0x00080000 |
| 48 | #define USBIP_URB_SETUP_MAP_SINGLE 0x00100000 |
| 49 | #define USBIP_URB_SETUP_MAP_LOCAL 0x00200000 |
| 50 | #define USBIP_URB_DMA_SG_COMBINED 0x00400000 |
| 51 | #define USBIP_URB_ALIGNED_TEMP_BUFFER 0x00800000 |
| 52 | |
| 53 | #endif /* _UAPI_LINUX_USBIP_H */ |
| 54 | |